Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. New Emulator

  2. Immo Bypass

  3. Julie Emulator

  4. AUTO-CHIPS

  5. Ecu-Service



Diagbox on windows 10
22-02-2018, 11:22 AM,
Post: #1
Diagbox on windows 10
Hallo everyone.

Does Diagbox function on windows 10?

If yes, which version do i have to gain?

Thank you.
Quote this message in a reply
22-02-2018, 12:45 PM,
Post: #2
RE: Diagbox on windows 10
Genuine versions of the latest diagbox work on windows 10. Currently the latest version is 9.21.
Kind regards
Gaz
Quote this message in a reply
22-02-2018, 13:00 PM,
Post: #3
RE: Diagbox on windows 10
I have 7.49 and it works perfectly, but I would install a newer version if it's a thank you link
Quote this message in a reply
22-02-2018, 14:10 PM,
Post: #4
RE: Diagbox on windows 10
DiagBox versions 7.xx and 8.xx (including Lexia and PP2000 components) work on Windows 10 32bit, if the installation procedure is followed, inspite of the warning from PSA.

However, they (7.xx & 8.xx) will install on Windows 64bit, but Lexia and PP2000 components will NOT work on 64bit Windows..
Quote this message in a reply
[+] 2 users say Thank You to Simple for this post
18-04-2019, 12:35 PM,
Post: #5
RE: Diagbox on windows 10
Hallo.

Please, isnt version of Diagbox where everithing function on windows 10 64bit?

Thank you.
Quote this message in a reply
18-04-2019, 17:07 PM,
Post: #6
RE: Diagbox on windows 10
(18-04-2019, 12:35 PM)blederik Wrote:  Hallo.

Please, isnt version of Diagbox where everithing function on windows 10 64bit?

Thank you.
Diagbox under 64 bit windows will NOT work the inside lexia and pps........ They are very old and the 'code' from them not support 64 bit windows........
So in your question for full support install under 32 bit windows or if you not care for the lexia and pps then ok install under 64 bit...........
Me personal i have the cracked 07.57 and 08.35 under windows 7 32bit and the online POI (aka EU edition) latest 09.45 under windows 7 64 bit........ wink2
Regarts........beer
Quote this message in a reply
[+] 1 user says Thank You to vagvag for this post
22-04-2019, 17:01 PM,
Post: #7
RE: Diagbox on windows 10
Diagbox 7.57 Under Win10 ver1809 32 bit : NO Problem.
Quote this message in a reply
21-06-2019, 01:30 AM,
Post: #8
RE: Diagbox on windows 10
(22-04-2019, 17:01 PM)DoZe Wrote:  Diagbox 7.57 Under Win10 ver1809 32 bit : NO Problem.

Just try installing and running v7.57 (7.01 pre-patched, 7.01 to 7.57 update) Under Windows 1903 (18362.175) : 

7.01 : install : Ok, running : Ok

7.57 : update setup is "near" Ok : 


At the end, a dos "boot loop" appears, a background service ask a firewall rule, i agree of course.
The bootloop continue. I decided to shutdown and restart.

After the reboot, try to launch : OK no prob, need to be tested on a car (as soon as i can).


AFTER TEST : NO prob, All is OK  nod
Quote this message in a reply


Possibly Related Threads...
Thread Author Replies Views Last Post
PPeugeot Diagbox Online - Tokens and Diagnostic Keys lucaslacerda 5 568 Yesterday, 05:57 AM
Last Post: wxhank
PPeugeot [How-To] Diagbox 7.57 telecoding Server fix Itsme 19 6,073 20-09-2019, 15:41 PM
Last Post: vagvag
  DiagBox 9.40 Oficial Rik 20 6,184 16-09-2019, 09:54 AM
Last Post: melashry
  DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) Simple 30 24,960 14-09-2019, 17:25 PM
Last Post: mishja
  Diagbox and cars newer than 2014 krikesa 4 418 10-09-2019, 10:17 AM
Last Post: krikesa
PCitroen Diagbox 7.83 software lotr 22 9,309 07-09-2019, 19:02 PM
Last Post: atiwok
PCitroen Diagbox version 9.23 capable of handling the DS7 Crossback Steve850 2 364 07-09-2019, 11:38 AM
Last Post: Steve850
  DiagBox 8.01 Installation Simple 212 106,140 06-09-2019, 15:46 PM
Last Post: diagnostic206
PCitroen PSA interface FIRMWARE 4.3.7 from official diagbox 9.37 911sniper 4 3,138 01-09-2019, 17:47 PM
Last Post: mattydr67
PPeugeot PSA Service Box & Diagbox TsiliR53 6 1,260 31-08-2019, 21:58 PM
Last Post: lucaslacerda

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content