Coding E9x speedometer in E8x - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Coding E9x speedometer in E8x (/showthread.php?tid=33199) |
Coding E9x speedometer in E8x - BB-Driver - 01-03-2018 Hi I want to code a 335d speedometer in a 123d What i need to note? Speedometer will be virginized before coding. Thanks BB-Driver RE: Coding E9x speedometer in E8x - emhtuning - 02-03-2018 (01-03-2018, 13:50 PM)BB-Driver Wrote: Hi I want to code a 335d speedometer in a 123d do you have a picture of the cluster installed in 123D ? RE: Coding E9x speedometer in E8x - BB-Driver - 02-03-2018 (02-03-2018, 02:21 AM)emhtuning Wrote:(01-03-2018, 13:50 PM)BB-Driver Wrote: Hi I want to code a 335d speedometer in a 123d No i don't have it yet, you only need to drill a litle on the frame. Connectors are plug and play. RE: Coding E9x speedometer in E8x - emhtuning - 02-03-2018 Well , I know many people tried it with no luck but you might have different approach. virgining the cluster is simple but you need R270 or Xprog tool ( hardware + software ) to be able to read the dump data of the used cluster then change the stored information . coding part the easiest in your project , all E8x uses the same coding data so you have 90% chance to simply plug it in - set VIN in tool32 and then expert coding with NCS. if for some reason NCS refuses to code it then a simple SSD file can load E90 FA and then you can code E90 cluster . |