[BB-Driver]

Hi I want to code a 335d speedometer in a 123d
What i need to note?
Speedometer will be virginized before coding.

Thanks BB-Driver

[emhtuning]

Hi I want to code a 335d speedometer in a 123d
What i need to note?
Speedometer will be virginized before coding.

Thanks BB-Driver

do you have a picture of the cluster installed in 123D ?

[BB-Driver]

Hi I want to code a 335d speedometer in a 123d
What i need to note?
Speedometer will be virginized before coding.

Thanks BB-Driver

do you have a picture of the cluster installed in 123D ?

No i don't have it yet, you only need to drill a litle on the frame.
Connectors are plug and play.

[emhtuning]

Well , I know many people tried it with no luck but you might have different approach.

virgining the cluster is simple but you need R270 or Xprog tool ( hardware + software ) to be able to read the dump data of the used cluster then change the stored information .

coding part the easiest in your project , all E8x uses the same coding data so you have 90% chance to simply plug it in - set VIN in tool32 and then expert coding with NCS. if for some reason NCS refuses to code it then a simple SSD file can load E90 FA and then you can code E90 cluster .