+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: F30 6WB Coding- Need Help (/showthread.php?tid=33699)
Pages:
1
2
F30 6WB Coding- Need Help - guw64 - 14-03-2018
Hy guys,
Today I installed a brand new 6wb cluster on my 2012.
Everything was good at the begining. Replaced 6wa in fa, inject cafd, etc. but my hud dont`t want to start so I decided to make a full Istep upgrade to my car.
Now the problems began. First, when I tried to flash kombi it ends with an error and after that Dkombi dissapear from my ecu list. When I read Svt I have Bkombi not Dkombi and I can`t code it anymore. Acc, lane change, lane assit is not working and kombi have a red dot on it.
Any help please!
RE: F30 6WB Coding- Need Help - hojo29 - 14-03-2018
(14-03-2018, 19:05 PM)guw64 Wrote: Hy guys,
Today I installed a brand new 6wb cluster on my 2012.
Everything was good at the begining. Replaced 6wa in fa, inject cafd, etc. but my hud dont`t want to start so I decided to make a full Istep upgrade to my car.
Now the problems began. First, when I tried to flash kombi it ends with an error and after that Dkombi dissapear from my ecu list. When I read Svt I have Bkombi not Dkombi and I can`t code it anymore. Acc, lane change, lane assit is not working and kombi have a red dot on it.
Any help please!
Has time criterion been changed here?
What is displayed when reading with ECU?
And what is displayed when it is read out with VCM?
RE: F30 6WB Coding- Need Help - guw64 - 14-03-2018
No time change. The car is 032012.
When I try to read it with ecu, kombi is not there is missing.
In vcm I have f20-14-11-520 and now I tried to upgrade to 17-11-520.
RE: F30 6WB Coding- Need Help - bmwcoder75 - 14-03-2018
(14-03-2018, 20:11 PM)guw64 Wrote: No time change. The car is 032012.
When I try to read it with ecu, kombi is not there is missing.
In vcm I have f20-14-11-520 and now I tried to upgrade to 17-11-520.
Go back to original equipment then flash the car with the original cluster. Remove 6WB from VA
RE: F30 6WB Coding- Need Help - hojo29 - 14-03-2018
(14-03-2018, 20:11 PM)guw64 Wrote: No time change. The car is 032012.
When I try to read it with ecu, kombi is not there is missing.
In vcm I have f20-14-11-520 and now I tried to upgrade to 17-11-520.
Send SVT_SOLL and SVT_IST with FA.XML file.
And FA.XML file.
And is the transport mode active in ISTA?
RE: F30 6WB Coding- Need Help - guw64 - 14-03-2018
(14-03-2018, 20:18 PM)hojo29 Wrote:(14-03-2018, 20:11 PM)guw64 Wrote: No time change. The car is 032012.
When I try to read it with ecu, kombi is not there is missing.
In vcm I have f20-14-11-520 and now I tried to upgrade to 17-11-520.
Send SVT_SOLL and SVT_IST with FA.XML file.
And FA.XML file.
And is the transport mode active in ISTA?
RE: F30 6WB Coding- Need Help - bmwcoder75 - 14-03-2018
(14-03-2018, 20:18 PM)hojo29 Wrote:(14-03-2018, 20:11 PM)guw64 Wrote: No time change. The car is 032012.
When I try to read it with ecu, kombi is not there is missing.
In vcm I have f20-14-11-520 and now I tried to upgrade to 17-11-520.
Send SVT_SOLL and SVT_IST with FA.XML file.
And FA.XML file.
And is the transport mode active in ISTA?
Irrelevant at this stage, first step to do is to upgrade istep to 07/2017++
And no Time Criterion MUST NOT be changed!
Especially saved in VCM, that is totally wrong! Few shops do this...
RE: F30 6WB Coding- Need Help - hojo29 - 14-03-2018
(14-03-2018, 20:28 PM)guw64 Wrote:(14-03-2018, 20:18 PM)hojo29 Wrote:(14-03-2018, 20:11 PM)guw64 Wrote: No time change. The car is 032012.
When I try to read it with ecu, kombi is not there is missing.
In vcm I have f20-14-11-520 and now I tried to upgrade to 17-11-520.
Send SVT_SOLL and SVT_IST with FA.XML file.
And FA.XML file.
And is the transport mode active in ISTA?
The build I level can not be: f20-14-11-520
f20-14-11-500 / 501/502/503/504/505
RE: F30 6WB Coding- Need Help - bmwcoder75 - 14-03-2018
(14-03-2018, 20:39 PM)hojo29 Wrote:(14-03-2018, 20:28 PM)guw64 Wrote:(14-03-2018, 20:18 PM)hojo29 Wrote:(14-03-2018, 20:11 PM)guw64 Wrote: No time change. The car is 032012.
When I try to read it with ecu, kombi is not there is missing.
In vcm I have f20-14-11-520 and now I tried to upgrade to 17-11-520.
Send SVT_SOLL and SVT_IST with FA.XML file.
And FA.XML file.
And is the transport mode active in ISTA?
The build I level can not be: f20-14-11-520
f20-14-11-500 / 501/502/503/504/505
Does not matter probably a typo, let's not stop at futile details like this.
Point is, car has older istep than 07.2017, so needs updated first before removing a single screw or changing FA!
RE: F30 6WB Coding- Need Help - guw64 - 14-03-2018
(14-03-2018, 20:39 PM)hojo29 Wrote:(14-03-2018, 20:28 PM)guw64 Wrote:(14-03-2018, 20:18 PM)hojo29 Wrote:(14-03-2018, 20:11 PM)guw64 Wrote: No time change. The car is 032012.
When I try to read it with ecu, kombi is not there is missing.
In vcm I have f20-14-11-520 and now I tried to upgrade to 17-11-520.
Send SVT_SOLL and SVT_IST with FA.XML file.
And FA.XML file.
And is the transport mode active in ISTA?
The build I level can not be: f20-14-11-520
f20-14-11-500 / 501/502/503/504/505
12-03-520 is build level
Now I put back my 6wa and still no comunication with ecu.
In ISTA kombi is red