[Question] How to use newest ISTA-P without IBAC Codes for F-Series for flashing - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: [Question] How to use newest ISTA-P without IBAC Codes for F-Series for flashing (/showthread.php?tid=33824) |
[Question] How to use newest ISTA-P without IBAC Codes for F-Series for flashing - M-Simon - 18-03-2018 Hi, ISTA-P Support for newer models (like F, G and I Series) was discontiniued (last version with full support was 3.63.4). But I heard / and read that newer ISTA-P versions can be still used with IBAC-Code for the affected models. What does that means excatly? There are a lot of tools for generating IBAC-Codes (like ISTA-P Launcher from Beemerboy88) but this codes are only for retrofiting as far as I see. How can I flash the entire car with ISTA-P and IBAC Code / which IBAC Code have to use? I think this is important for users with retrofitted ECUS which should not be flashed in ISTA-P in expert mode. Thank you very much! RE: [Question] How to use newest ISTA-P without IBAC Codes for F-Series for flashing - Bimmer540 - 18-03-2018 From which version of Ista-p is IBAC Code requested? RE: [Question] How to use newest ISTA-P without IBAC Codes for F-Series for flashing - beemered - 18-03-2018 ISTA-P will give you the order code, for example 001D. Then generate the IBAC. RE: [Question] How to use newest ISTA-P without IBAC Codes for F-Series for flashing - Jumper - 18-03-2018 The session can be continued with the IBAC code, retrofitting is no longer available. RE: [Question] How to use newest ISTA-P without IBAC Codes for F-Series for flashing - M-Simon - 18-03-2018 @myfirst1er How do you decide / know which key number (5 in your case) is needed? Thanks again! RE: [Question] How to use newest ISTA-P without IBAC Codes for F-Series for flashing - Jumper - 18-03-2018 (18-03-2018, 11:42 AM)Munich Simon Wrote: @myfirst1er How do you decide / know which key number (5 in your case) is needed? Today I generated the IBAC with key 1 and the retrofits appear RE: [Question] How to use newest ISTA-P without IBAC Codes for F-Series for flashing - winter - 19-03-2018 (18-03-2018, 08:00 AM)Munich Simon Wrote: Hi, Two solutions.one is IBAC generator then whole car programming will go on.the other is ISTA with all programming data was installed before. RE: [Question] How to use newest ISTA-P without IBAC Codes for F-Series for flashing - luntik - 19-03-2018 Guys, who can explain it to me, what is the ISTA/P for? I always use E-Sys and just want to understand the importance of ISATA/P RE: [Question] How to use newest ISTA-P without IBAC Codes for F-Series for flashing - RocketSurgeon - 25-01-2019 I understand how to generate the IBAC code to enable ISTA-P, but the latest standalone versions do not contain PSDZ. Can I simply inject the PSDZ from the same version into the ISTA-P/BMW/Services/data/ecudata folder to enable ISTA-P for F-series? |