+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: How can connect digiprog 3 to pc and save the dumps? (/showthread.php?tid=3499)
Pages:
1
2
How can connect digiprog 3 to pc and save the dumps? - 14bogdan - 04-04-2014
How can connect digiprog 3 to pc and save the dumps?
RE: How can connect digiprog 3 to pc and save the dumps? - Dash_Burner - 04-04-2014
(04-04-2014, 13:40 PM)14bogdan Wrote: How can connect digiprog 3 to pc and save the dumps?
Download eetool for digiprog and install it.
Install ftdi drivers.
Connect digiprog to pc via usb and with external power supply.
Go to device manager and check number of right port
Go to digiprog-special functions and select pc term on
run eetool software
select right port
and thats it.....
RE: How can connect digiprog 3 to pc and save the dumps? - darek_naprawa - 04-04-2014
The program in the Annex, together with the description.
Re: RE: How can connect digiprog 3 to pc and save the dumps? - teerak2uk - 05-04-2014
(04-04-2014, 13:40 PM)14bogdan Wrote: How can connect digiprog 3 to pc and save the dumps?
Connect it to pc to see if pc detects it first as many machines are missing ftdi chips from pcb
How can connect digiprog 3 to pc and save the dumps? - 14bogdan - 07-04-2014
Solved big THANKS !
Sent from my iPad using Tapatalk
RE: How can connect digiprog 3 to pc and save the dumps? - octav_kiss - 26-04-2014
Work for anyone?
I installed the application and does not work.
After you connect the usb digiprog and try to connect
I get the following error,,Gerat nicht gefunden,,
Not working for windows 7?
does anyone have the software?
thanks
RE: How can connect digiprog 3 to pc and save the dumps? - iKarz - 14-06-2014
Hello,
I downloaded the provided files on this Post and installed the software. I'm using Windows 7.
Notes: Installed EeTool correctly using the download on an earlier post.
The problem is that the computer is telling me the device connected (digiprog 3) does not have a driver.
Questions:
(1) How did you solve this? that is, how did you install the drivers? or maybe I just don't have them...
(2) Which version of Windows are you using? For which versions of Windows are these drivers intended?
Let me know if I wasn't clear enough.
Regards,
iKarz
RE: How can connect digiprog 3 to pc and save the dumps? - iKarz - 15-06-2014
Solved it.
Windows XP is needed. Drivers do not work with Windows 7.
Regards,
[/quote]
RE: How can connect digiprog 3 to pc and save the dumps? - C(A)R - 15-06-2014
Stupidity you write. I have a windows 7 64-bit and digiprog with him working. No drivers are needed. Simply select the options digiprog PC TERM in special functions and turn on the computer Eetool and running.
RE: How can connect digiprog 3 to pc and save the dumps? - iKarz - 17-06-2014
It is great if it worked for you with windows 7, however it did not work for me with windows 7 otherwise I wouldn't have asked. This response is for "Stupidity you write" and to let others know if they are also having the same issue.
Regards