+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: ISTA-P bricked DME (/showthread.php?tid=36641)
Pages:
1
2
ISTA-P bricked DME - lagunasec - 23-06-2018
Hi,
I tried to update the DME with ISTA-P and this bricked it.
Now the DME is left with programming status 15.
What has gone wrong?
Attached is the ISTA-P report.
RE: ISTA-P bricked DME - 2013m5 - 23-06-2018
Reset battery “Disconnect negative battery cable” for 30 minutes, and reprogram the DME.
RE: ISTA-P bricked DME - mjuhl2003 - 23-06-2018
And let us know if you get it running again!
RE: ISTA-P bricked DME - snf11lci - 23-06-2018
Reset natery helped ? Please let us know
RE: ISTA-P bricked DME - rana - 23-06-2018
you have winkfp if yes send me PM
RE: ISTA-P bricked DME - Enabled - 24-06-2018
(23-06-2018, 06:14 AM)lagunasec Wrote: Hi,
I tried to update the DME with ISTA-P and this bricked it.
Now the DME is left with programming status 15.
What has gone wrong?
Attached is the ISTA-P report.
What tool did you use?
RE: ISTA-P bricked DME - lagunasec - 24-06-2018
Thanks for your inputs.
On second attempt, ISTA-P was unable to identify the DME, so the programming was impossible.
Tried winkfp in comfort mode, not working.
I sent the DME to a local tunner but was impossible to recover via BDM, the flash is damaged.
I eventually bought an used DME and the tuning specialist fixed it for me.
I am interested if someone knows what damaged the DME in the first place (maybe from ista-p report), in order to avoid this from happening in the future.
The tools used were original icom next and 100A power source.
RE: ISTA-P bricked DME - oceandiver86 - 24-06-2018
was the DME still visible in diagnostic (INPA/ISTA/ tool32)
if yes, should be possible to recover in winkfp expert mode!
RE: ISTA-P bricked DME - dfitz21 - 24-06-2018
Why were you updating the DME? If it had an internal fault code it was junk anyways. Depending on your model of vehicle they do get water damaged often from people leaving the plastic cowling off.
RE: ISTA-P bricked DME - B1257 - 24-06-2018
(24-06-2018, 05:02 AM)lagunasec Wrote: I am interested if someone knows what damaged the DME in the first place (maybe from ista-p report), in order to avoid this from happening in the future. The tools used were original icom next and 100A power source.
I think Intel flash data erase was the problem or not good working.
As you can see in the log erasing the flash made a problem.
The Intel chip has write protectec areas, may be the power source made a voltage shift or spikes. What kind of charger was it?
Erasing and writing of a flash is always a voltage critical process.