+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio , NAVIGATION (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Solved ✔ DME Replacement 2012 F10 M5 with a used DME (/showthread.php?tid=37548)
Pages:
1
2
DME Replacement 2012 F10 M5 with a used DME - muranoone - 19-07-2018
Hi everyone I have a 2012 BMW F10 M5 USA. A shop has determined that the DME/DDE Has failed to send spark to cylinder #4.
I have purchased a DME used on Ebay. It has a VIN Number from another car in it.
Can someone guide me on how to replace this unit?
I have ENET and i5тд-р working on my laptop, is this software ok to replace this unit?
Is their any other way to do this?
DME ECU Control Unit MEVD1728
Thanks!
RE: DME Replacement 2012 F10 M5 with a used DME - SweetBMW - 19-07-2018
No you cannot do this with any dealer software. You need third рдятy DME cloning tools or EEPROM readers to do this because of the CAS - DME rolling codes, which is if i remember correctly, pretty heavily encrypted in these DMEs.
RE: DME Replacement 2012 F10 M5 with a used DME - muranoone - 19-07-2018
ok that's what I thought because it just wouldn't work with this i5тд-р. Even when I tried to process "Replace Control Unit" it did not recognize that I installed the used DME.
If you or someone can point me in the right direction I would greatly appreciate it. this customer is been waiting 4+ months...long story
I have seen Autohex II from Microtech but it looks like I need to buy a 2300.00 їсош connector. I do not have that money. I paid 399.00for the used DME.
Thanks again!
RE: DME Replacement 2012 F10 M5 with a used DME - miniveho94 - 20-07-2018
(19-07-2018, 21:43 PM)muranoone Wrote: ok that's what I thought because it just wouldn't work with this i5тд-р. Even when I tried to process "Replace Control Unit" it did not recognize that I installed the used DME.
If you or someone can point me in the right direction I would greatly appreciate it. this customer is been waiting 4+ months...long story
I have seen Autohex II from Microtech but it looks like I need to buy a 2300.00 їсош connector. I do not have that money. I paid 399.00for the used DME.
Thanks again!
You need buy ktag, i think then you can clone this ecu. Ktag can read mpc and eeprom.
RE: DME Replacement 2012 F10 M5 with a used DME - nesa - 20-07-2018
you can use ёд5у by OBD with Autohex Bmw explorer
Just read out isn from old end write to used
regards
RE: DME Replacement 2012 F10 M5 with a used DME - muranoone - 20-07-2018
Hey everyone ! Thanks for the reply's!!!
So i found BMW Explorer : BMW ISN : ECU Explorer ... its saying something about a USB/Dongle?
Please connect dongle?
any idea's?
Thanks again for the input everyone!!
Robert
RE: DME Replacement 2012 F10 M5 with a used DME - muranoone - 21-07-2018
Hey everyone ! Thanks for the reply's!!!
So i found BMW Explorer : BMW ISN : ECU Explorer ... its saying something about a USB/Dongle?
Please connect dongle?
any idea's?
Thanks again for the input everyone!!
Robert
(21-07-2018, 00:42 AM)muranoone Wrote: Hey everyone ! Thanks for the reply's!!!That BMW EXPLORER is out of my budget.
So i found BMW Explorer : BMW ISN : ECU Explorer ... its saying something about a USB/Dongle?
Please connect dongle?
any idea's?
Thanks again for the input everyone!!
Robert
I did contact someone to come locally here in the US, and he arrived with ABRITES & FVDI V2015 via ENET connected and the unit took a shit exactly when we called up the ECU's!!! What a disappointment
It Just lost connection to the FVDI, he tried everything Firmware updates Software updates for hours and nothing.
SO I am on a mission this must be rectified ASAP... can some one connect Remotely???
I know someone on this forum has the skills!!!
LMK!!!
RE: DME Replacement 2012 F10 M5 with a used DME - samoosa1 - 21-07-2018
(21-07-2018, 00:42 AM)muranoone Wrote: Hey everyone ! Thanks for the reply's!!!
So i found BMW Explorer : BMW ISN : ECU Explorer ... its saying something about a USB/Dongle?
Please connect dongle?
any idea's?
Thanks again for the input everyone!!
Robert
(21-07-2018, 00:42 AM)muranoone Wrote: Hey everyone ! Thanks for the reply's!!!That BMW EXPLORER is out of my budget.
So i found BMW Explorer : BMW ISN : ECU Explorer ... its saying something about a USB/Dongle?
Please connect dongle?
any idea's?
Thanks again for the input everyone!!
Robert
I did contact someone to come locally here in the US, and he arrived with ABRITES & FVDI V2015 via ENET connected and the unit took a shit exactly when we called up the ECU's!!! What a disappointment
It Just lost connection to the FVDI, he tried everything Firmware updates Software updates for hours and nothing.
SO I am on a mission this must be rectified ASAP... can some one connect Remotely???
I know someone on this forum has the skills!!!
LMK!!!
which cylinder is misfiring as in what?the spark plug or the injector?have had quite a few of these and rectified them without replacing the DME.
RE: DME Replacement 2012 F10 M5 with a used DME - muranoone - 21-07-2018
So the car wouldn’t start and we figured out it was the Camshaft Position Sensor. Once we replaced it, car started right up ....then Coil # 4 first one on the passenger side closer to the firewall caught on fire !
We replaced the coil and spark plug w brand new ones and then no spark from the DME CAN Line from the DME to the coil.
RE: DME Replacement 2012 F10 M5 with a used DME - samoosa1 - 22-07-2018
(21-07-2018, 19:31 PM)muranoone Wrote: So the car wouldn’t start and we figured out it was the Camshaft Position Sensor. Once we replaced it, car started right up ....then Coil # 4 first one on the passenger side closer to the firewall caught on fire !if you can send me a picture of the inside of the ECU ,i can show you what to deal with and sort your problen.is it a 6 cylinder or 4?
We replaced the coil and spark plug w brand new ones and then no spark from the DME CAN Line from the DME to the coil.