BMW Icom A2 repair - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: BMW Icom A2 repair (/showthread.php?tid=37989) |
RE: BMW Icom A2 repair - ____ANGEL___ - 18-10-2019 (18-10-2019, 05:27 AM)tictach Wrote: Hi all .. anyone have icom a2 24c02 eeprom file . my icom leeds red al time and can not restor . read out 24c02 and se some hex missing comparing hex to picture i found. Change serial and restore with usb key RE: BMW Icom A2 repair - tictach - 18-10-2019 (18-10-2019, 05:37 AM)____ANGEL___ Wrote:(18-10-2019, 05:27 AM)tictach Wrote: Hi all .. anyone have icom a2 24c02 eeprom file . my icom leeds red al time and can not restor . read out 24c02 and se some hex missing comparing hex to picture i found. i have tryed that .. Icom worke with older firmware but when update to 03-15-00 it did not work . tryed to change serial 24c02 after i got all leds red light . tryed to restore but no luck . Thanx RE: BMW Icom A2 repair - ferrum - 18-10-2019 24c02 china A2 and change serial 1801208 RE: BMW Icom A2 repair - tictach - 18-10-2019 (18-10-2019, 11:28 AM)ferrum Wrote: 24c02 china A2 and change serial 1801208 Thank you . Found a broken resistor on pin 8 24c02 sda found broke resistor on pin8 24c02 sda ? anyone know resistance on that ? yellow marking at pic RE: BMW Icom A2 repair - ferrum - 18-10-2019 resistor resistor resistor 10k RE: BMW Icom A2 repair - tictach - 19-10-2019 Icom a2 changed ip on restore to 169.254.70.103 Possible to change back to 169.254.90.38 . have try with older versin rescuefile factory reset . Problem Solved !! What is the RAR arcive on usb stick after restore .. possible to open ?need pass... RE: BMW Icom A2 repair - dist01 - 22-10-2019 i have intersted issue. first connection in the it is ok it run how long i need. If i unplug obd and reconnect obd all LED lights red. After 3 hours it is connestion ok RE: BMW Icom A2 repair - hanz330 - 17-04-2022 Hello, i read all pages, but didn't find answer. I'm trying to return my old genuine A2 unit back to service, because my another Icom (genuine Next under warranty) has connection problems. Mentioned A2 Icom just blink all leds once after connection to OBD. Is this common failure with known solution? RE: BMW Icom A2 repair - ferrum - 17-04-2022 (22-10-2019, 05:10 AM)dist01 Wrote: i have intersted issue. first connection in the it is ok it run how long i need. What ICOM and preferably a photo? RE: BMW Icom A2 repair - ferrum - 18-04-2022 (17-04-2022, 19:08 PM)hanz330 Wrote: Hello, i read all pages, but didn't find answer. Flashing LEDs mean nothing. We can only say that the processor does not start, and there can be a lot of reasons. |