UPA USB CLONE ISSUE - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9) +--- Thread: UPA USB CLONE ISSUE (/showthread.php?tid=43049) Pages:
1
2
|
||||||||||
UPA USB CLONE ISSUE - strikeforce - 01-12-2018 Bought a China clone UPA 1.3 and it installed correct with drivers. Read 93c46 o.k but can't read any Motorola mcu always says device is not responding and 1 error is found even when it checks out correct with voltmeter. Run hardware test with sometimes 4, 5, or 6 failed test. Please any suggestions? RE: UPA USB CLONE ISSUE - strikeforce - 01-12-2018 (01-12-2018, 08:35 AM)strikeforce Wrote: Bought a China clone UPA 1.3 and it installed correct with drivers. Read 93c46 o.k but can't read any Motorola mcu always says device is not responding and 1 error is found even when it checks out correct with voltmeter. Run hardware test with sometimes 4, 5, or 6 failed test. Please any suggestions?Additional info RE: UPA USB CLONE ISSUE - uranuss - 01-12-2018 4, 5, or 6 failed test. Something is wrong with inverter MC34063A. First check soldering. RE: UPA USB CLONE ISSUE - strikeforce - 03-12-2018 (01-12-2018, 20:34 PM)uranuss Wrote: 4, 5, or 6 failed test. Thanks for responding. Can you please point to the inverter MC34063A on the attached pic? RE: UPA USB CLONE ISSUE - uranuss - 03-12-2018 (03-12-2018, 08:45 AM)strikeforce Wrote:(01-12-2018, 20:34 PM)uranuss Wrote: 4, 5, or 6 failed test. Take look on the connections, not only around inverter but whole pcb (not that one with usb port). Make better quality photo of that pcb. I have to compare to ori. RE: UPA USB CLONE ISSUE - strikeforce - 03-12-2018 (03-12-2018, 11:43 AM)uranuss Wrote:Thanks once more. hope these ones are clear enough.(03-12-2018, 08:45 AM)strikeforce Wrote:(01-12-2018, 20:34 PM)uranuss Wrote: 4, 5, or 6 failed test. RE: UPA USB CLONE ISSUE - hcip - 03-12-2018 the Test result in your attachment is only for 3.3V, can you show the result of 5.0V testing? RE: UPA USB CLONE ISSUE - uranuss - 03-12-2018
|