Ista D 4.10.20 failed to start - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Ista D 4.10.20 failed to start (/showthread.php?tid=45389) Pages:
1
2
|
Ista D 4.10.20 failed to start - rickynguyen - 22-01-2019 Followed the instruction in FAQ file but start failed, tried to removed and installed many times but nil help, what was i wrong ? Pictures attached is all i installed. Ediabas installed in c:\ Rheingold installed in c:\ SQliteDBs unziped to c:\Rheingold\ RE: Ista D 4.10.20 failed to start - Twoone - 22-01-2019 (22-01-2019, 04:14 AM)rickynguyen Wrote: Followed the instruction in FAQ file but start failed, tried to removed and installed many times but nil help, what was i wrong ? Did you unblock all files before extract? Check registry settings. RE: Ista D 4.10.20 failed to start - timelord - 22-01-2019 what about BLP/SDP ? did you extract `em or disable it in gui config ? RE: Ista D 4.10.20 failed to start - rickynguyen - 22-01-2019 (22-01-2019, 08:11 AM)Twoone Wrote:Yes, removed “read only” before extract(22-01-2019, 04:14 AM)rickynguyen Wrote: Followed the instruction in FAQ file but start failed, tried to removed and installed many times but nil help, what was i wrong ? (22-01-2019, 08:26 AM)timelord Wrote: what about BLP/SDP ? did you extract `em or disable it in gui config ?I use ISTA-D for diagnostic only, so i dont download BLP/SDP. Correct me if i was wrong. Does BLP/SDP required for ISTA-D start normally ? RE: Ista D 4.10.20 failed to start - BMWS1000RR - 23-01-2019 (22-01-2019, 23:48 PM)rickynguyen Wrote:(22-01-2019, 08:11 AM)Twoone Wrote:Yes, removed “read only” before extract(22-01-2019, 04:14 AM)rickynguyen Wrote: Followed the instruction in FAQ file but start failed, tried to removed and installed many times but nil help, what was i wrong ? If you have downloaded Spider80 Standalone install package ? you have created the PATH incorrectly. It is C:\BMW\Rheingold\ *_* See picture attached with the wording from the FAQ-EN.PDF If this solves your problem feel free to thank my button and REP me. RE: Ista D 4.10.20 failed to start - Shinoby - 23-01-2019 (22-01-2019, 23:48 PM)rickynguyen Wrote:BLP needed!!!(22-01-2019, 08:11 AM)Twoone Wrote:Yes, removed “read only” before extract(22-01-2019, 04:14 AM)rickynguyen Wrote: Followed the instruction in FAQ file but start failed, tried to removed and installed many times but nil help, what was i wrong ? RE: Ista D 4.10.20 failed to start - rickynguyen - 23-01-2019 U (23-01-2019, 00:49 AM)BMWS1000RR Wrote:I tried but still same errors(22-01-2019, 23:48 PM)rickynguyen Wrote:(22-01-2019, 08:11 AM)Twoone Wrote:Yes, removed “read only” before extract(22-01-2019, 04:14 AM)rickynguyen Wrote: Followed the instruction in FAQ file but start failed, tried to removed and installed many times but nil help, what was i wrong ? (23-01-2019, 07:45 AM)Shinoby Wrote:BLP downloaded and unzip to instruction folder but still same errors(22-01-2019, 23:48 PM)rickynguyen Wrote:BLP needed!!!(22-01-2019, 08:11 AM)Twoone Wrote:Yes, removed “read only” before extract(22-01-2019, 04:14 AM)rickynguyen Wrote: Followed the instruction in FAQ file but start failed, tried to removed and installed many times but nil help, what was i wrong ? RE: Ista D 4.10.20 failed to start - inspi1981 - 23-01-2019 And value to registry added? RE: Ista D 4.10.20 failed to start - Lemta - 23-01-2019 (23-01-2019, 07:45 AM)Shinoby Wrote:(22-01-2019, 23:48 PM)rickynguyen Wrote: I use ISTA-D for diagnostic only, so i dont download BLP/SDP. Correct me if i was wrong.BLP needed!!! @Shinoby I've been told BLP not required for diagnostic only. There seems to be lots of conflicting information regarding this. Anyway, I have installed without BLP and ISTA starts fine - I have only done fault scans so I don't know whether things such as headlight calibration works or not. Can you clarify what would not work without BLP, Shinoby? RE: Ista D 4.10.20 failed to start - rickynguyen - 24-01-2019 (23-01-2019, 10:48 AM)inspi1981 Wrote: And value to registry added?Yes, run the x64.reg file to added registry. Still error |