CarTechnoloGY
Ista D 4.10.20 failed to start - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Ista D 4.10.20 failed to start (/showthread.php?tid=45389)

Pages: 1 2

RE: Ista D 4.10.20 failed to start - Shinoby - 24-01-2019

(23-01-2019, 14:20 PM)Lemta Wrote:  
(23-01-2019, 07:45 AM)Shinoby Wrote:  
(22-01-2019, 23:48 PM)rickynguyen Wrote:  I use ISTA-D for diagnostic only, so i dont download BLP/SDP. Correct me if i was wrong.
Does BLP/SDP required for ISTA-D start normally ?
BLP needed!!!

@Shinoby
I've been told BLP not required for diagnostic only. There seems to be lots of conflicting information regarding this. Anyway, I have installed without BLP and ISTA starts fine - I have only done fault scans so I don't know whether things such as headlight calibration works or not. Can you clarify what would not work without BLP, Shinoby?
Basic Logistic Programming (BLP) is required in ISTA+ to work with basic functions without the need for coding/flashing.
SDP (equivalent to psdzdata) - a set of firmware for ISTA +. Used for programming F, G, I series.

Don't forget press [Image: tyl_add.png] and [Image: postbit_reputation.gif], if my post helped you.
(23-01-2019, 14:20 PM)Lemta Wrote:  
(23-01-2019, 07:45 AM)Shinoby Wrote:  
(22-01-2019, 23:48 PM)rickynguyen Wrote:  I use ISTA-D for diagnostic only, so i dont download BLP/SDP. Correct me if i was wrong.
Does BLP/SDP required for ISTA-D start normally ?
BLP needed!!!

@Shinoby
I've been told BLP not required for diagnostic only. There seems to be lots of conflicting information regarding this. Anyway, I have installed without BLP and ISTA starts fine - I have only done fault scans so I don't know whether things such as headlight calibration works or not. Can you clarify what would not work without BLP, Shinoby?
Basic Logistic Programming (BLP) is required in ISTA+ to work with basic functions without the need for coding/flashing.
SDP (equivalent to psdzdata) - a set of firmware for ISTA +. Used for programming F, G, I series.

Don't forget press [Image: tyl_add.png] and [Image: postbit_reputation.gif], if my post helped you.