+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: BMW E90 177PS (/showthread.php?tid=46832)
BMW E90 177PS - sebastianfernandes - 18-02-2019
Hello Guys
Sorry, forgive me for being ignorant i am new to chiptuning..
I would like to tune my BMW E90 320D 177PS stage 1
I have kess V5.017 and ktag V7.020 clone with software v2.47 provided on the forum.
I have read the ID as follows with Kess
HW: 08512498
SW: 1037509478
VIN nr.: WBAPN37090XXXXXXX
SW ver.:
Spare: 08516775
Engine:
HW Ver.: 0281016110
SW upg.: 08516820
Installation:
Its DDE8 8506438 from my understanding and research it happens to be EDC17CP02
My question is
Should i read it with Kess or Ktag.
Searching on the web, most say that this ecu needs to be written in boot mode or bdm? So anyway i will have to open the ECU. I need to make a full backup before writing just incase something messes up. Backup with Kess or Ktag?
I will post my file after reading, please if anyone can help me tune it stage 1.
Any advise would be greatly appreciated.
Forgive my ignorance.
Thanks in advance.
RE: BMW E90 177PS - 8baller - 18-02-2019
what age is the vehicle?
i dont have the list that people use to sometimes tell whether its safe for obd or not by the bosch sw number
i would make full backup by kess, why not, and then work with ktag in boot
safest way
RE: BMW E90 177PS - walshy155 - 18-02-2019
That ECU is tuning protected, check my thread on about the same ECU, read and write via tricore bootmode to be safe
All the best!
https://cartechnology.co.uk/showthread.php?tid=46782
And see
RE: BMW E90 177PS - sebastianfernandes - 18-02-2019
Thanks for the advise guys Car is E90 320d LCI 2009.
RE: BMW E90 177PS - sebastianfernandes - 21-02-2019
I just read the ecu via Kess 2.47 ODB.
Can someone please check if this is good read? So i know my tool is good.
I will then proceed to read it in tricore boot mode.
Many thanks