+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: Ktag error while reading ECU with GPT cable (/showthread.php?tid=49512)
Pages:
1
2
Ktag error while reading ECU with GPT cable - amit_talkin - 13-04-2019
I just got Ktag today, was trying to read ECU ( edc17c10 TC1797 Ford GPT ). Getting following error while reading.
""Communication error with the ECU: control all connections; if the problem persists, send log file to the assistance"
Any clue on this matter? I have applied 15v 1.5A power to ktag . Also tried stock adapter which came with Ktag which has 12V 1A. same error on both.
RE: Ktag error while reading ECU with GPT cable - ionut83 - 13-04-2019
I think is too much 15v, and it is possible to have a bad connection on the board. Recheck your connections, and put 14,5v , instead 15v
RE: Ktag error while reading ECU with GPT cable - amit_talkin - 13-04-2019
I double checked connection to the board. everything is okey.
I can only select between 12 and 15v on my power supply
.
RE: Ktag error while reading ECU with GPT cable - ionut83 - 13-04-2019
Try to use 12v, or his own power supply(wich came with ktag)
RE: Ktag error while reading ECU with GPT cable - amit_talkin - 13-04-2019
Tried that already. not working.
Should I try different protocol? My car has TPROT12, which is not listed.
Tried MED17 Ford TPROT12 protocol but it shows same error.( it has diff connection than mine as ECU is petrol while mine is Diesel ).
RE: Ktag error while reading ECU with GPT cable - ionut83 - 13-04-2019
Do you use ksuite 2.25?
RE: Ktag error while reading ECU with GPT cable - amit_talkin - 13-04-2019
No, i m using 2.23.
Just tried 2.25. Now it shows " The tool is not powered correctly: Control power supply" error.
lol...wtf 15v is not enough?
RE: Ktag error while reading ECU with GPT cable - ionut83 - 13-04-2019
That i was saying... too much power
)
RE: Ktag error while reading ECU with GPT cable - amit_talkin - 14-04-2019
(13-04-2019, 19:16 PM)ionut83 Wrote: That i was saying... too much power
Tried with 12v 1A and 12V 1.5A as well, still same error even on stock power adapter came with ktag.
EDIT: Tried on 15v 1.5A with ksuite 2.25 and it now shows same error ""Communication error with the ECU: control all connections; if the problem persists, send log file to the assistance"
RE: Ktag error while reading ECU with GPT cable - amit_talkin - 14-04-2019
okey looks like power issue to me. Should I try with 14v 5A adapter? what is safe range of voltage and ampere on ktag/ecu?