+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: BMW X5 E70 SOS Malfunction Error (/showthread.php?tid=50730)
Pages:
1
2
RE: BMW X5 E70 SOS Malfunction Error - mad_presley - 15-05-2022
(15-05-2022, 20:33 PM)stecom90 Wrote: I will try but no CIC/combox, retrofit evo and atm
OK, my mistake, forgot EVO/ATM retrofit. Code only KOMBI with this and then try code BUB_FITTED->nicht_aktiv in ATM.
RE: BMW X5 E70 SOS Malfunction Error - morepower - 15-05-2022
Hello, y'all are forgeting the "airbags module"...
RE: BMW X5 E70 SOS Malfunction Error - stecom90 - 24-05-2022
612/614/615/616/6AA/6AB removed, code KOMBI, FZD, ABG > No success
Disable 3 FDL assist, online_services, ... (like as TELD) in EVO but but i can't connect to the ATM.
How to read ATM with retrofit EVO Exx ?
RE: BMW X5 E70 SOS Malfunction Error - szilagyilajos - 24-05-2022
To connect ATM need ENET cable and Esys.
RE: BMW X5 E70 SOS Malfunction Error - stecom90 - 25-05-2022
If I plug the atm into another car (Fxx) while doing the coding, no risk for FSCs, evo or something else ?
Just to modify the atm and then I put it back in the E70
RE: BMW X5 E70 SOS Malfunction Error - szilagyilajos - 25-05-2022
ATM doesn't store any FSC. ATM only store VIN number, so no risk of FSC's.
RE: BMW X5 E70 SOS Malfunction Error - futa - 07-09-2022
A similar problem is E60 retrofitted to the NBT EVO.
An SOS error appears even after coding ATM and initializing KOMBI.
Please tell me how to solve it.
RE: BMW X5 E70 SOS Malfunction Error - DieStream - 07-09-2022
I get the same Problem with combox retrofit. Two cables from the combox goes to the PDC.
After them, all SOS failure is away.
RE: BMW X5 E70 SOS Malfunction Error - roni21 - 09-09-2022
Hello can i code this with Protool from bimmergeek?