+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: ISTA and orig. ICOM Next can not flash HU-B Unit and Kombi -Abbort of programming (/showthread.php?tid=52050)
ISTA and orig. ICOM Next can not flash HU-B Unit and Kombi -Abbort of programming - M-Simon - 09-06-2019
Hi Guys,
tried to flash the F39 (X2) of my wife with newest ISTA and original ICOM next. Everything went well except the flash of the HU-B and Kombi ECU.
While flashing the Central Display shows a Bootloader but no software will be flashed. ISTA tries this a couple of times but then shows a message and a red symbol that this step was abborted.
Unfotunateley BMW connected drive is now not longer running. I guess because the Software beteween HU-B and the other ECU´s is different.
Actually my wife is not in a good mood in cause of my action
I tried allready a power down also ISTA tried it, but wihout success.
What can I do now?
Thank you very much!
BR
Simon
RE: ISTA and orig. ICOM Next can not flash HU-B Unit and Kombi -Abbort of programming - ReitiRight - 09-06-2019
Are you sure that Windows Firewall was disabled complete?
RE: ISTA and orig. ICOM Next can not flash HU-B Unit and Kombi -Abbort of programming - sebastianfernandes - 09-06-2019
Did you use router?
RE: ISTA and orig. ICOM Next can not flash HU-B Unit and Kombi -Abbort of programming - danyro - 09-06-2019
Did you try to use a dhcp server? Even on your laptop not necessary a physical router with dhcp - eg dhcpsrv http://www.dhcpserver.de/cms/
RE: ISTA and orig. ICOM Next can not flash HU-B Unit and Kombi -Abbort of programming - ReitiRight - 09-06-2019
https://cartechnology.co.uk/showthread.php?tid=9162&highlight=Ethernet
RE: ISTA and orig. ICOM Next can not flash HU-B Unit and Kombi -Abbort of programming - M-Simon - 09-06-2019
Hi,
thanks for your fast responses. Firewall is fully disabled.
Actually no Router or DHCP Server is running.
The Icom next is directly connected to the Laptop.
Thanks again!
Will try DHCP Server now!
RE: ISTA and orig. ICOM Next can not flash HU-B Unit and Kombi -Abbort of programming - ReitiRight - 09-06-2019
Use DHCP for flash with ICOM Ort just use a Ethernet Cable and E-Sys.
RE: ISTA and orig. ICOM Next can not flash HU-B Unit and Kombi -Abbort of programming - danyro - 09-06-2019
Install a software dhcp server like i posted above, connect icom ethernet cable to your laptop ethertnet port and try like this. Make dhcp scope with range of 169.254.0.0 netmask 255.255.0.0.
RE: ISTA and orig. ICOM Next can not flash HU-B Unit and Kombi -Abbort of programming - Matthew53 - 09-06-2019
(09-06-2019, 12:35 PM)danyro Wrote: Install a software dhcp server like i posted above, connect icom ethernet cable to your laptop ethertnet port and try like this. Make dhcp scope with range of 169.254.0.0 netmask 255.255.0.0.
I've got everything set, but with little different config.
Static IP on Ethernet - 192.168.68.99,
subnet - 255.255.255.0
Icom set on 192.168.68.85, subnet as above, gateway 192.168.68.99
Run dhcp server connected to ethernet adapter and everything seems to be good, but there is "DHCP enabled - No"
in Ethernet status. I suppose it should be "yes", when DHCP server is on. Am I right?
RE: ISTA and orig. ICOM Next can not flash HU-B Unit and Kombi -Abbort of programming - M-Simon - 09-06-2019
Tried a couple of hours but with no look. ICOM is not reqesting a DHCP IP from the Client with DHCP Server running. It looks like that the ICOM itselve is playing DHCP Server?
Is the setting right?