+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: VIN change with Tool32 (/showthread.php?tid=52249)
VIN change with Tool32 - youbarajs - 13-06-2019
I tried to change the VIN in the Combox module using Tool32, here are the steps i followed
Loaded Tool32
Selected cmediar
Under jobs, selected c_fg_schreiben
Pasted the VIN on the section below Arguments
Clicked on 1 time process button (or whatsoever its called, (1~>))
repeated the process for c_fg_auftrag
While the process states job successful, but when I read the VIN using INPA its shows "yyyyyyyy"
Am i doing something wrong?
(I am trying to change the vin back to my original vin)
RE: VIN change with Tool32 - JCTI - 13-06-2019
Do you input only VIN or VIN with the 17th digit checksum number?
I always use the VIN with 17th digit checksum number (from NCSExpert for example) and it usually works. Never done Combox tho.
RE: VIN change with Tool32 - dstrickland - 13-06-2019
Inpa is reading from the UIF field.
If you run job C_FG_LESEN it will likely show your correct vin, if you want to get rid of the YYYYYY you need to also write the uif using job AIF_SCHREIBEN.
RE: VIN change with Tool32 - atalay - 13-06-2019
flash it with winfpf
RE: VIN change with Tool32 - youbarajs - 14-06-2019
(13-06-2019, 17:35 PM)JCTI Wrote: Do you input only VIN or VIN with the 17th digit checksum number?
I always use the VIN with 17th digit checksum number (from NCSExpert for example) and it usually works. Never done Combox tho.
Vin + Checksum from the ncsexpert FA screen (total of 18 digits,17 digits VIN and 1 checksum)
(13-06-2019, 21:16 PM)dstrickland Wrote: Inpa is reading from the UIF field.
If you run job C_FG_LESEN it will likely show your correct vin, if you want to get rid of the YYYYYY you need to also write the uif using job AIF_SCHREIBEN.
I will try this and report back..
RE: VIN change with Tool32 - youbarajs - 14-06-2019
I tired to write vin with AIF_SCHREIBEN job, but it gives me following error, am I missing something
"Error_vehicle_identification_NR"
I followed the similar process of selecting CMEDIAR and changing the VIN using AIF_SCHREIBEN job.