Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
VIN change with Tool32
13-06-2019, 17:09 PM,
Post: #1
|
|||
|
|||
VIN change with Tool32
I tried to change the VIN in the Combox module using Tool32, here are the steps i followed
Loaded Tool32 Selected cmediar Under jobs, selected c_fg_schreiben Pasted the VIN on the section below Arguments Clicked on 1 time process button (or whatsoever its called, (1~>)) repeated the process for c_fg_auftrag While the process states job successful, but when I read the VIN using INPA its shows "yyyyyyyy" Am i doing something wrong? (I am trying to change the vin back to my original vin) |
|||
13-06-2019, 17:35 PM,
Post: #2
|
|||
|
|||
RE: VIN change with Tool32
Do you input only VIN or VIN with the 17th digit checksum number?
I always use the VIN with 17th digit checksum number (from NCSExpert for example) and it usually works. Never done Combox tho. |
|||
13-06-2019, 21:16 PM,
Post: #3
|
|||
|
|||
RE: VIN change with Tool32
Inpa is reading from the UIF field.
If you run job C_FG_LESEN it will likely show your correct vin, if you want to get rid of the YYYYYY you need to also write the uif using job AIF_SCHREIBEN. |
|||
13-06-2019, 21:17 PM,
Post: #4
|
|||
|
|||
RE: VIN change with Tool32
flash it with winfpf
|
|||
14-06-2019, 06:05 AM,
(This post was last modified: 14-06-2019, 06:27 AM by youbarajs.)
Post: #5
|
|||
|
|||
RE: VIN change with Tool32
(13-06-2019, 17:35 PM)JCTI Wrote: Do you input only VIN or VIN with the 17th digit checksum number? Vin + Checksum from the ncsexpert FA screen (total of 18 digits,17 digits VIN and 1 checksum) (13-06-2019, 21:16 PM)dstrickland Wrote: Inpa is reading from the UIF field. I will try this and report back.. |
|||
14-06-2019, 10:04 AM,
Post: #6
|
|||
|
|||
RE: VIN change with Tool32
I tired to write vin with AIF_SCHREIBEN job, but it gives me following error, am I missing something
"Error_vehicle_identification_NR" I followed the similar process of selecting CMEDIAR and changing the VIN using AIF_SCHREIBEN job. |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
NBT EVO HDD change tutorial | RuleNormaliai | 19 | 2,461 |
26-04-2024, 17:23 PM Last Post: grizzle |
|
buy solution for change ISN for MG1 and MD1 | dfb | 0 | 204 |
15-04-2024, 00:21 AM Last Post: dfb |
|
Tool32 Brakefluid Argument | bmchicago | 4 | 362 |
29-03-2024, 13:41 PM Last Post: bmchicago |
|
BMW e39 530d 2001 problem after MAF change | boweld11 | 3 | 170 |
24-03-2024, 22:44 PM Last Post: SkeYT |
|
[Question] Change X1 F48 gearbox | jaramillo | 9 | 1,470 |
24-03-2024, 21:27 PM Last Post: masa52 |
|
How to change VIN code in VCM via Esys? | vipsha | 5 | 1,474 |
14-03-2024, 22:20 PM Last Post: tcp443 |
|
FLM change | TomSab | 0 | 97 |
12-03-2024, 19:17 PM Last Post: TomSab |
|
F48 CID change | qbek90 | 0 | 109 |
10-03-2024, 09:13 AM Last Post: qbek90 |
|
Change NBT Evo iDrive 6 Lite Main Menu Car Widget | bradsm87 | 6 | 576 |
07-03-2024, 06:23 AM Last Post: RuleNormaliai |
|
reset gps evo unit tool32 | Fx82 | 3 | 797 |
04-03-2024, 20:20 PM Last Post: Cerhio |
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content