+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Tool32 problem (/showthread.php?tid=57403)
Tool32 problem - BobbySD - 03-10-2019
Hi there,
Im starting to be crazy about tool32. Everytime I try to run a job I get runtime 5 error - Tool Set Error: Run-time error ’5’ – Invalid Procedure Call
Connection is ok, I found out a solution in FAQ like
Reason: The Tool Set was started twice in a very short period of time.
Solution: Close all Tool Set processes that are running and start the Tool Set again with only one double-click.
But there is not any another instance of toolset in the processes! Im getting mad of it. This happens even after restart.
Do somebody have any experience with that?
Thanks!!
RE: Tool32 problem - ImmBoo - 03-10-2019
Are you using ICOM or standard interface?
Is your tool32 set to run as Admin and with Win XP SP3 compability?
Is the interfaces delay set for 1ms?
RE: Tool32 problem - Enabled - 03-10-2019
Tool32 should be ran as administrator. It doesn't have to be XP compatibility, however.
RE: Tool32 problem - hashtagmaster - 04-10-2019
Always start as admin
works fine on Windows 10 x64 ..
RE: Tool32 problem - BobbySD - 07-10-2019
It does this also with admin rights. And Im using oem ICOM.
RE: Tool32 problem - BobbySD - 16-10-2019
Any other advice?
RE: Tool32 problem - zmaj - 10-09-2022
I do have the same issue. Dont know why. Using icom and win8.1 32bit
RE: Tool32 problem - Illuminati23 - 10-09-2022
Is there another Ediabas package or folder on your system? --> Delete thr second One, you don't need, its make Problems....
RE: Tool32 problem - Vojno - 10-09-2022
If your Ediabas folder find the REGSVR32.BAT then start it (with administrator)
RE: Tool32 problem - zmaj - 12-09-2022
(10-09-2022, 13:53 PM)Vojno Wrote: If your Ediabas folder find the REGSVR32.BAT then start it (with administrator)
Hi, thank You for the tip. I ran it and it told me that tool32 is installed and the two modules are registred. Will try tomorow to connect it to my car. I hope it will do it
(10-09-2022, 13:18 PM)Illuminati23 Wrote: Is there another Ediabas package or folder on your system? --> Delete thr second One, you don't need, its make Problems....
No there isnt. every time i make a backup I put it in a rar so it should not intefere. Everything works except tool32 (and i need it).