+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: ISTA 4.20.1 Release Information (/showthread.php?tid=58534)
ISTA 4.20.1 Release Information - Fx82 - 25-10-2019
The following I-Levels will be released in this version:
- F001-19-11-510
- F010-19-11-520
- F020-19-11-520
- F025-19-11-520
- F056-19-11-520
- I001-19-11-520
- S15A-19-11-520
- S18A-19-07-570
Important Notes about this version: The following issues have been corrected
* NEW * I12, I15 - Execution stop
Fault description:
At the start of the programming session an execution stop occurs with a reference to the Release Notes.
Model series affected:
I12, I15 vehicles with 4U1 optional equipment.
Measure / Workaround:
Carry out conversions and retrofitting later.
Fault corrected by:
Expected with ISTA 4.20.2x
Affected application:
ISTA 4
* NEW * G0x, G1x, G3x with HU-H3 - Execution stop with alternative I level
Fault description:
At the start of the programming session an execution stop occurs with a reference to the Release Notes.
ISTA offers the option of programming the vehicle with an alternative I level S15A-19-07-5xx.
In this case, an IBAC can be requested from Technical Support.
Model series affected:
G01, G02, G11, G12, G30, G31, G32, F90 vehicles with HU-H3 MGU.
Measure / Workaround:
Programming with alternative I level, request IBAC from Technical Support if necessary.
Fault corrected by:
Expected with ISTA 4.20.2x
Affected application:
ISTA 4
* NEW * Odometer adjustment pop-up
Fault description:
A pop-up about odometer adjustment is displayed during programming.
Model series affected:
G05, G06, G07, G14, G15, G16, G20, G21, G28, G29, F40, F44, F91, F92, F93, F95, F96 and G11, G12 vehicles, as of life cycle impulse.
Measure / Workaround:
If the odometer reading is less than 500 km, the message can be ignored.
If the odometer reading is more than 500 km, contact Technical Support and create a TSARA IRAP case.
Fault corrected by:
Expected with ISTA 4.20.3x.
RE: ISTA 4.20.1 Release Information - ingmv - 26-10-2019
Here are all information ....