[Fx82]

The following I-Levels will be released in this version: 

• F001-19-11-510
  
  
• F010-19-11-520
  
  
• F020-19-11-520
  
  
• F025-19-11-520
  
  
• F056-19-11-520
  
  
• I001-19-11-520
  
  
• S15A-19-11-520
  
  
• S18A-19-07-570
  

    
Important Notes about this version: The following issues have been corrected
* NEW * I12, I15 - Execution stop
Fault description:
At the start of the programming session an execution stop occurs with a reference to the Release Notes.
Model series affected:
I12, I15 vehicles with 4U1 optional equipment.
Measure / Workaround:
Carry out conversions and retrofitting later.
Fault corrected by:
Expected with ISTA 4.20.2x
Affected application:
ISTA 4


* NEW * G0x, G1x, G3x with HU-H3 - Execution stop with alternative I level
Fault description:
At the start of the programming session an execution stop occurs with a reference to the Release Notes.
ISTA offers the option of programming the vehicle with an alternative I level S15A-19-07-5xx.
In this case, an IBAC can be requested from Technical Support.
Model series affected:
G01, G02, G11, G12, G30, G31, G32, F90 vehicles with HU-H3 MGU.
Measure / Workaround:
Programming with alternative I level, request IBAC from Technical Support if necessary.
Fault corrected by:
Expected with ISTA 4.20.2x
Affected application:
ISTA 4
 
* NEW * Odometer adjustment pop-up
Fault description:
A pop-up about odometer adjustment is displayed during programming.
Model series affected:
G05, G06, G07, G14, G15, G16, G20, G21, G28, G29, F40, F44, F91, F92, F93, F95, F96 and G11, G12 vehicles, as of life cycle impulse.
Measure / Workaround:
If the odometer reading is less than 500 km, the message can be ignored.
If the odometer reading is more than 500 km, contact Technical Support and create a TSARA IRAP case.
Fault corrected by:
Expected with ISTA 4.20.3x.

[ingmv]

Here are all information ....