+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55)
+---- Thread: Confusing part numbers and parameter file needed for VW Polo 6R (/showthread.php?tid=59078)
Confusing part numbers and parameter file needed for VW Polo 6R - koldplayer - 15-01-2022
Hi guys,
i have a vw polo 6r with a permantent dtc complaining about some start-stop parametrization error. Start-Stop doesn't work at all. Any configuration using the infotainment fails with an error.
Looking for the part number of the MQB A0 GW it shows
VW/Audi part number: 6C0909901
Hardware part number: 6C0937089
Searching for these part numbers on the internet I only find VW Polo BCMs ??? Looking for the BCM of my car it shows
VW/Audi part number: 6C0937089C
Hardware part number: 6C0937089
Why does the BCM and the GW have the same part number? Is the GW and the BCM only one control unit in my car? Is the GW included in the BCM?
I also can't find a fitting parametrization file with VCP. Can someone help me out getting the gw parametrization file to get start-stop working again?
Thx,
Dw4rv3n
RE: Confusing part numbers and parameter file needed for VW Polo 6R - t8Cal - 17-01-2022
got a full scan with ODIS or VCDS? that might shed some light on it
RE: Confusing part numbers and parameter file needed for VW Polo 6R - mrbla - 19-01-2022
I learned yesterday that there are indeed cars in VAG company where BCM1 and GW is one ECU. It is for some MQB-A cars like that.
RE: Confusing part numbers and parameter file needed for VW Polo 6R - koldplayer - 20-01-2022
(17-01-2022, 10:47 AM)t8Cal Wrote: got a full scan with ODIS or VCDS? that might shed some light on itI have an autoscan made with VCP.
Can someone help me getting the parameter file for this BCM/GW?
RE: Confusing part numbers and parameter file needed for VW Polo 6R - ALE009 - 24-01-2022
6C0 are parts for polo 6C ( facelift 2014>) not 6R
RE: Confusing part numbers and parameter file needed for VW Polo 6R - koldplayer - 24-01-2022
Well, ok, its a 2014 polo 6. Nonetheless gw parameters still needed, if some1 has them
RE: Confusing part numbers and parameter file needed for VW Polo 6R - MarcinOslo - 24-01-2022
Yes ,gateway and BCM is one control unit ,gateway is in BCM (same as some skoda's).
If your BCM is original and compatible by VIN ,just do software configuration with ODIS online.