2011 E90 PAD active - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: 2011 E90 PAD active (/showthread.php?tid=59133) Pages:
1
2
|
2011 E90 PAD active - Eyestorm - 16-01-2022 Hello. When trying to connect to my 2011 E90 325d whit ISTA 4.33.20 today I got a "PAD Active" error.. I use same pc whit same ISTA yesterday and then everyting was working fine. I change onlinemode = true in registry but did not help. Im using ICOM A2. Anyone have any solution about this probem? RE: 2011 E90 PAD active - Node - 16-01-2022 Your problem is "Vehicle could not be identified successfully". PAD active is just one thing to be checked in such a case, but ONLY on G+ series. On earlier cars - is ignition on? (16-01-2022, 11:00 AM)Eyestorm Wrote: Anyone have any solution about this probem? If still nothing - do the leg work. Does the car work at all? Diagnostic socket not broken? Pins in place? Voltages correct? Your ICOM works on similar cars? RE: 2011 E90 PAD active - Eyestorm - 16-01-2022 (16-01-2022, 11:02 AM)Node Wrote: Your problem is "Vehicle could not be identified successfully". PAD active is just one thing to be checked in such a case, but ONLY on G+ series. On earlier cars - is ignition on?Yes car work fine. I drove the car yesterday. I use Bosch 90A charger so voltage is stabil at 13,6V and iginition is on. All pins and OBD contakt is as new. But after I wrote the first post I remember that I have inst "Patched_EDIABAS_7.3.0". Will it affect ISTA? RE: 2011 E90 PAD active - Node - 16-01-2022 It should not affect ICOM, but then I remember I had problems installing patched Ediabas long time ago. Don't remember what those were. RE: 2011 E90 PAD active - gmarius - 16-01-2022 check with IToolRadar the IP adress of your ICOM and that this IP is set in ISTA RE: 2011 E90 PAD active - Node - 16-01-2022 (16-01-2022, 11:39 AM)gmarius Wrote: check with IToolRadar the IP adress of your ICOM and that this IP is set in ISTA How could he get that message if there would be no ICOM connection??? Thanks, I had a good laugh RE: 2011 E90 PAD active - Eyestorm - 16-01-2022 (16-01-2022, 11:45 AM)Node Wrote:I can see ICOM in connection manager and there can I se IP adress and that ICOM is "free".(16-01-2022, 11:39 AM)gmarius Wrote: check with IToolRadar the IP adress of your ICOM and that this IP is set in ISTA ICOM is set to DCHP and PC set to get IP automatic. RE: 2011 E90 PAD active - Bimmer540 - 16-01-2022 And vci interface in ista? And you choose the write brand cars? RE: 2011 E90 PAD active - gmarius - 16-01-2022 (16-01-2022, 11:45 AM)Node Wrote:(16-01-2022, 11:39 AM)gmarius Wrote: check with IToolRadar the IP adress of your ICOM and that this IP is set in ISTA Happy you had a good laugh, as you can see in his attached picture he gets no connection. I have sometimes the same problem my ICOM will have another IP address than the one already set in ISTA and vehicle can not be identified. RE: 2011 E90 PAD active - Bimmer540 - 16-01-2022 Its not needed to set ip adres in ista |