Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
2011 E90 PAD active
16-01-2022, 11:00 AM,
(This post was last modified: 16-01-2022, 11:01 AM by Eyestorm.)
Post: #1
|
|||
|
|||
2011 E90 PAD active
Hello.
When trying to connect to my 2011 E90 325d whit ISTA 4.33.20 today I got a "PAD Active" error.. I use same pc whit same ISTA yesterday and then everyting was working fine. I change onlinemode = true in registry but did not help. Im using ICOM A2. Anyone have any solution about this probem? |
|||
16-01-2022, 11:02 AM,
(This post was last modified: 16-01-2022, 11:05 AM by Node.)
Post: #2
|
|||
|
|||
RE: 2011 E90 PAD active
Your problem is "Vehicle could not be identified successfully". PAD active is just one thing to be checked in such a case, but ONLY on G+ series. On earlier cars - is ignition on?
(16-01-2022, 11:00 AM)Eyestorm Wrote: Anyone have any solution about this probem? If still nothing - do the leg work. Does the car work at all? Diagnostic socket not broken? Pins in place? Voltages correct? Your ICOM works on similar cars? |
|||
16-01-2022, 11:09 AM,
(This post was last modified: 16-01-2022, 11:20 AM by Eyestorm.)
Post: #3
|
|||
|
|||
RE: 2011 E90 PAD active
(16-01-2022, 11:02 AM)Node Wrote: Your problem is "Vehicle could not be identified successfully". PAD active is just one thing to be checked in such a case, but ONLY on G+ series. On earlier cars - is ignition on?Yes car work fine. I drove the car yesterday. I use Bosch 90A charger so voltage is stabil at 13,6V and iginition is on. All pins and OBD contakt is as new. But after I wrote the first post I remember that I have inst "Patched_EDIABAS_7.3.0". Will it affect ISTA? |
|||
16-01-2022, 11:19 AM,
Post: #4
|
|||
|
|||
RE: 2011 E90 PAD active
It should not affect ICOM, but then I remember I had problems installing patched Ediabas long time ago. Don't remember what those were.
|
|||
16-01-2022, 11:39 AM,
Post: #5
|
|||
|
|||
RE: 2011 E90 PAD active
check with IToolRadar the IP adress of your ICOM and that this IP is set in ISTA
|
|||
16-01-2022, 11:45 AM,
Post: #6
|
|||
|
|||
RE: 2011 E90 PAD active
|
|||
16-01-2022, 12:00 PM,
(This post was last modified: 16-01-2022, 12:06 PM by Eyestorm.)
Post: #7
|
|||
|
|||
RE: 2011 E90 PAD active
(16-01-2022, 11:45 AM)Node Wrote:I can see ICOM in connection manager and there can I se IP adress and that ICOM is "free".(16-01-2022, 11:39 AM)gmarius Wrote: check with IToolRadar the IP adress of your ICOM and that this IP is set in ISTA ICOM is set to DCHP and PC set to get IP automatic. |
|||
16-01-2022, 12:10 PM,
Post: #8
|
|||
|
|||
RE: 2011 E90 PAD active
And vci interface in ista? And you choose the write brand cars?
|
|||
16-01-2022, 12:21 PM,
Post: #9
|
|||
|
|||
RE: 2011 E90 PAD active
(16-01-2022, 11:45 AM)Node Wrote:(16-01-2022, 11:39 AM)gmarius Wrote: check with IToolRadar the IP adress of your ICOM and that this IP is set in ISTA Happy you had a good laugh, as you can see in his attached picture he gets no connection. I have sometimes the same problem my ICOM will have another IP address than the one already set in ISTA and vehicle can not be identified. |
|||
16-01-2022, 12:30 PM,
Post: #10
|
|||
|
|||
RE: 2011 E90 PAD active
Its not needed to set ip adres in ista
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content