ZBE4 Controller flash for F10 EVO retrofit - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: ZBE4 Controller flash for F10 EVO retrofit (/showthread.php?tid=63047) Pages:
1
2
|
ZBE4 Controller flash for F10 EVO retrofit - gabur431 - 08-04-2022 Hello does somebody know how to flash the ZBE4 Controller from the G30 to make it work for NBT EVO ID6 in F10 LCI ? I have in my F10 LCI NBT EVO ID6 retrofit with my NBT Controller ( Ceramik ) but now i have buy one controller from G30 ( also Ceramik Version ) and i know it has to be flash to work like KCAN2 Controller. Thank YOU RE: ZBE4 Controller flash for F10 EVO retrofit - dncomputech - 09-04-2022 (08-04-2022, 12:53 PM)gabur431 Wrote: Hello Are you planning to flash the ZBE Gxx on the desk or flash it on the car?. I used to do this onbench many times RE: ZBE4 Controller flash for F10 EVO retrofit - user_530d - 09-04-2022 You can flash the controller to work on F-series on bench or in car. Both is possible. RE: ZBE4 Controller flash for F10 EVO retrofit - DEJMIEN - 10-04-2022 Yes you can, just use f series data to calculate tal, it is not complicated. RE: ZBE4 Controller flash for F10 EVO retrofit - gabur431 - 11-04-2022 Thanks for the Help i figute it out how to flash it from F30 with NBT EVO and the KCAN4 Controller data. it took me a few Hours how to calculate it but now it work wery well i flash it on bench, tested with NBT EVO ID4, but the Lights on the controller is not turning on on bench, after i install it in the car the Lights works. BTLD ist the same for KCAN2 and KCAN4 ist: SWFL_000030BF_002_013_001 this is ZBE4 KCAN4 SWFL_0000315F_002_005_000 soll: SWFL_000030E8_002_013_001 this is ZBE4 KCAN2 for Fxx Modell SWFL_0000315E_002_005_000 RE: ZBE4 Controller flash for F10 EVO retrofit - simzep - 11-04-2022 How do you force esys to calculate the TAL with the F-series data? RE: ZBE4 Controller flash for F10 EVO retrofit - user_530d - 11-04-2022 With F-series VO it only create F-series TAL. RE: ZBE4 Controller flash for F10 EVO retrofit - alsamaraee - 20-05-2022 (11-04-2022, 06:38 AM)gabur431 Wrote: Thanks for the Help Hi, I also have zbe4 need to flash it to work on nbt evo (G30) installed on my F11 pre-lci. How did you know that BTLD is same? there is no zbe4 k-can2, isn't it? When I try calculate svt-tar get zbe3 even different BTLD and one SWFL. I do not get how you calculate the svt/tal? Thanks in advanced RE: ZBE4 Controller flash for F10 EVO retrofit - RuleNormaliai - 20-05-2022 use F3x FA, because F1x never had EVO, so it will not calculate you ZBE4. RE: ZBE4 Controller flash for F10 EVO retrofit - user_530d - 20-05-2022 (20-05-2022, 08:08 AM)RuleNormaliai Wrote: use F3x FA, because F1x never had EVO, so it will not calculate you ZBE4. That's not true. F06, F12, F13 has EVO from factory. This cars use F10-xxx.. data also. |