[gabur431]

Hello

does somebody know how to flash the ZBE4 Controller from the G30 to make it work for NBT EVO ID6 in F10 LCI ?

I have in my F10 LCI NBT EVO ID6 retrofit with my NBT Controller ( Ceramik ) but now i have buy one controller from G30 ( also Ceramik Version ) and i know it has to be flash to work like KCAN2 Controller. 

Thank YOU

[dncomputech]

Hello

does somebody know how to flash the ZBE4 Controller from the G30 to make it work for NBT EVO ID6 in F10 LCI ?

I have in my F10 LCI NBT EVO ID6 retrofit with my NBT Controller ( Ceramik ) but now i have buy one controller from G30 ( also Ceramik Version ) and i know it has to be flash to work like KCAN2 Controller. 

Thank YOU

Are you planning to flash the ZBE Gxx on the desk or flash it on the car?.
I used to do this onbench many times

[user_530d]

You can flash the controller to work on F-series on bench or in car. Both is possible.

[DEJMIEN]

Yes you can, just use f series data to calculate tal, it is not complicated.

[gabur431]

Thanks for the Help

i figute it out how to flash it from F30 with NBT EVO and the KCAN4 Controller data.

it took me a few Hours how to calculate it but now it work wery well

i flash it on bench, tested with NBT EVO ID4, but the Lights on the controller is not turning on on bench, after i install it in the car the Lights works.

BTLD ist the same for KCAN2 and KCAN4

ist:
SWFL_000030BF_002_013_001 this is ZBE4 KCAN4
SWFL_0000315F_002_005_000

soll:
SWFL_000030E8_002_013_001 this is  ZBE4 KCAN2 for Fxx Modell
SWFL_0000315E_002_005_000

[simzep]

How do you force esys to calculate the TAL with the F-series data?

[user_530d]

With F-series VO it only create F-series TAL.

[alsamaraee]

Thanks for the Help

i figute it out how to flash it from F30 with NBT EVO and the KCAN4 Controller data.

it took me a few Hours how to calculate it but now it work wery well

i flash it on bench, tested with NBT EVO ID4, but the Lights on the controller is not turning on on bench, after i install it in the car the Lights works.

BTLD ist the same for KCAN2 and KCAN4

ist:
SWFL_000030BF_002_013_001 this is ZBE4 KCAN4
SWFL_0000315F_002_005_000

soll:
SWFL_000030E8_002_013_001 this is  ZBE4 KCAN2 for Fxx Modell
SWFL_0000315E_002_005_000

Hi,
I also have zbe4 need to flash it to work on nbt evo (G30) installed on my F11 pre-lci.
How did you know that BTLD is same? there is no zbe4 k-can2, isn't it?

When I try calculate svt-tar get zbe3 even different BTLD and one SWFL.
I do not get how you calculate the svt/tal?

Thanks in advanced

[RuleNormaliai]

use F3x FA, because F1x never had EVO, so it will not calculate you ZBE4.

[user_530d]

use F3x FA, because F1x never had EVO, so it will not calculate you ZBE4.

That's not true. F06, F12, F13 has EVO from factory. This cars use F10-xxx.. data also.