+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: VVDI Prog 35128WT on 35160DW (/showthread.php?tid=63319)
RE: VVDI Prog 35128WT on 35160DW - PsevDo - 15-04-2022
(15-04-2022, 11:41 AM)BMWzone Wrote: It's Mode 1 with 16.400 Kmyes i done it, but cluster have ~44000 km, mileage in car was increased, now bought new bdc, need do do cluster proper mileage ~18000km
in this cluster mileage is not on first 2lines
RE: VVDI Prog 35128WT on 35160DW - BMWzone - 15-04-2022
It's Mode 2, but eprom isn't original or already treated improperly, if I see as Mode 2 have 43.952 Km, however all the Mode 2 eproms seen have 0000 the first two lines and not 0104, Mode 2 is easier to reset
RE: VVDI Prog 35128WT on 35160DW - smilo - 15-04-2022
In my case, after few tries on 35128WT using CGPro, the eeprom show now "invalid mileage"
When I try to reset in mode 1, it's rejected before begining processing, with error: mileage more than 800.000 km is not supported..
In Mode 2, I have message that operation completed, but the cluster still not accepted in the car (RED DOT, mileage car not retreived after coding)
Real headache..
I read everywhere that VVDI is the perfect solution. After ordered it, unfortunately it work only for 160WT..
RE: VVDI Prog 35128WT on 35160DW - BMWzone - 15-04-2022
(15-04-2022, 13:10 PM)smilo Wrote: In my case, after few tries on 35128WT using CGPro, the eeprom show now "invalid mileage"
When I try to reset in mode 1, it's rejected before begining processing, with error: mileage more than 800.000 km is not supported..
In Mode 2, I have message that operation completed, but the cluster still not accepted in the car (RED DOT, mileage car not retreived after coding)
Real headache..
I read everywhere that VVDI is the perfect solution. After ordered it, unfortunately it work only for 160WT..
it has happened to me too with 35128WT on CGPro Mode 1, anyway eprom works in car
RE: VVDI Prog 35128WT on 35160DW - smilo - 15-04-2022
(15-04-2022, 13:44 PM)BMWzone Wrote:(15-04-2022, 13:10 PM)smilo Wrote: In my case, after few tries on 35128WT using CGPro, the eeprom show now "invalid mileage"
When I try to reset in mode 1, it's rejected before begining processing, with error: mileage more than 800.000 km is not supported..
In Mode 2, I have message that operation completed, but the cluster still not accepted in the car (RED DOT, mileage car not retreived after coding)
Real headache..
I read everywhere that VVDI is the perfect solution. After ordered it, unfortunately it work only for 160WT..
it has happened to me too with 35128WT on CGPro Mode 1, anyway eprom works in car
Unfortunately it doesn’t worked for me.. in the car I have 999999
The VIN is written after coding, but not mileage
RE: VVDI Prog 35128WT on 35160DW - PsevDo - 15-04-2022
(15-04-2022, 12:24 PM)BMWzone Wrote: It's Mode 2, but eprom isn't original or already treated improperly, if I see as Mode 2 have 43.952 Km, however all the Mode 2 eproms seen have 0000 the first two lines and not 0104, Mode 2 is easier to reset
cluster was not touched before 100%, just for future i need to know what mode i must use, another person said, that cgpro cant do mileage on 6wb g30, because he dont know where mileage is
RE: VVDI Prog 35128WT on 35160DW - BMWzone - 15-04-2022
(15-04-2022, 14:01 PM)smilo Wrote:(15-04-2022, 13:44 PM)BMWzone Wrote:(15-04-2022, 13:10 PM)smilo Wrote: In my case, after few tries on 35128WT using CGPro, the eeprom show now "invalid mileage"
When I try to reset in mode 1, it's rejected before begining processing, with error: mileage more than 800.000 km is not supported..
In Mode 2, I have message that operation completed, but the cluster still not accepted in the car (RED DOT, mileage car not retreived after coding)
Real headache..
I read everywhere that VVDI is the perfect solution. After ordered it, unfortunately it work only for 160WT..
it has happened to me too with 35128WT on CGPro Mode 1, anyway eprom works in car
Unfortunately it doesn’t worked for me.. in the car I have 999999
The VIN is written after coding, but not mileage
he wrote more than 1 million km in one place after failed reset, but reassembling it and testing at bench the mileage was right, put in car it worked as before
RE: VVDI Prog 35128WT on 35160DW - smilo - 15-04-2022
Unfortunately for me, put on the car doesn’t resolve the problem..
I tried to change manually the first two lines in mode 2, but it fails each time
RE: VVDI Prog 35128WT on 35160DW - smilo - 16-04-2022
So up today, there is no reliable solution for 128WT in the market..
RE: VVDI Prog 35128WT on 35160DW - Spitfire555 - 16-04-2022
(15-04-2022, 21:07 PM)smilo Wrote: I tried to change manually the first two lines in mode 2, but it fails each time
Probably, the first two lines (0x00h - 0x1Fh) INC area like all other M35080 / 160xx variants. You have to select MODE_1 to be able to erase the first two lines.
Always be sure what mode you want to use:
- MODE_1 uses the first two lines
- MODE_2 do not uses them, so the value for 0x00h - 0x1Fh should be still 0x00h