Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
VVDI Prog 35128WT on 35160DW
15-04-2022, 00:15 AM,
Post: #1
|
|||
|
|||
VVDI Prog 35128WT on 35160DW
Hi to all,
Considering chips sizes, do you know if it's possible to copy 128WT to 160DW using VVDI prog ? Thanks |
|||
15-04-2022, 06:43 AM,
Post: #2
|
|||
|
|||
RE: VVDI Prog 35128WT on 35160DW
35128 is double size as 35160, so you copy half of info
|
|||
Reputation: +1 - smilo [+1] | |||
15-04-2022, 06:48 AM,
Post: #3
|
|||
|
|||
RE: VVDI Prog 35128WT on 35160DW
Thank you.
So what’s the solution for 35128WT ? |
|||
15-04-2022, 07:25 AM,
Post: #4
|
|||
|
|||
RE: VVDI Prog 35128WT on 35160DW
|
|||
Reputation: +1 - smilo [+1] | |||
15-04-2022, 08:15 AM,
Post: #5
|
|||
|
|||
RE: VVDI Prog 35128WT on 35160DW
(15-04-2022, 07:25 AM)Spitfire555 Wrote:(15-04-2022, 06:48 AM)smilo Wrote: So what’s the solution for 35128WT ? Thank you I also use CGPro with 35160 adapter. However, some chips are not supported. Even by heating to 100% before erase mileage. Do you have a solution for it ? |
|||
15-04-2022, 08:51 AM,
Post: #6
|
|||
|
|||
RE: VVDI Prog 35128WT on 35160DW
I do it like this:
initialization of the device and then the memory soldered into the socket and set the hotair to 120 C and it heats up all the time. Then I set the milage to 100km and do write. I use hotair all the time during the process !!!MGU Virgin and Custom FSC!!!
EVO ENTRYNA2 FSC Remote 8HP Reset Kafas 4 Virgin If I help press rep and THX |
|||
Reputation: +2 - smilo [+1] , al70 [+1] | |||
15-04-2022, 09:14 AM,
Post: #7
|
|||
|
|||
RE: VVDI Prog 35128WT on 35160DW
I don't heat the chip, but always use 16km (00h, 01h, 00h, 01h, ...) instead trying to erase for 0km.
|
|||
15-04-2022, 11:19 AM,
(This post was last modified: 15-04-2022, 11:20 AM by smilo.)
Post: #8
|
|||
|
|||
RE: VVDI Prog 35128WT on 35160DW
(15-04-2022, 09:14 AM)Spitfire555 Wrote: I don't heat the chip, but always use 16km (00h, 01h, 00h, 01h, ...) instead trying to erase for 0km. Thank you. 0km is not accepted in any case. I generally put 16 in mode 1, 32 in mode 2. Also in the past I used 1024, 4096, etc. (15-04-2022, 08:51 AM)laso Wrote: I do it like this: You solder the chip on a board connected to the adapter to be able to hit it all the reset time ? |
|||
15-04-2022, 11:26 AM,
Post: #9
|
|||
|
|||
RE: VVDI Prog 35128WT on 35160DW
hello, this is 35128wt from g30 6WB cluster, which mode i must use for mileage reset, mode1 or mode2? mode's showing different milage which one showing true?
|