ICOM-A unable to display on-board voltage - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: ICOM-A unable to display on-board voltage (/showthread.php?tid=63632) |
ICOM-A unable to display on-board voltage - bbw - 22-04-2022 I have a genuine (icom-a). Recently, it was inserted into the vehicle for diagnosis. It was found that ISTA kl15 showed 0V and 12V on the vehicle. I tried all the vehicles and confirmed that my (icom-a) was indeed broken. I checked and found that one of the array pins was broken, so I replaced the whole diagnostic port pin. The last kl15 display is 0V. Have you ever encountered a similar situation? RE: ICOM-A unable to display on-board voltage - hashtagmaster - 22-04-2022 board language is english RE: ICOM-A unable to display on-board voltage - bbw - 22-04-2022 (22-04-2022, 06:52 AM)hashtagmaster Wrote: board language is english sorry |