G30 coding cheat sheet (request) - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: G30 coding cheat sheet (request) (/showthread.php?tid=64109) Pages:
1
2
|
G30 coding cheat sheet (request) - donjuan020 - 03-05-2022 Hello, I searched the forums, but I could not find the G30 coding list. I'm doing some coding with Bimmercode. I need the encoding list to be able to do the same encodings to the remote vehicle. Can you share about it? respects. I found the post of a Korean friend. I am sharing them in the attachment. HERE WE CAN CREATE A CODING ARCHIVE FOR THE G-SERIES. I BELIEVE IT WILL BE A BEAUTIFUL ARCHIVE IF THE PROFESSIONALS SUPPORT IT. RE: G30 coding cheat sheet (request) - donjuan020 - 04-05-2022 Add G20 Coding cheat sheet. RE: G30 coding cheat sheet (request) - donjuan020 - 04-05-2022 M Font and Logo DKombi4 Expert Mode 3001 KI_Parameter AG_MPA_MSP_VIEW MPA_ANSICHT_260_SKALA LOGO 3001 KI_PARAMETER LOGO_SCHRIFTZUG MSP_LOGO CAR COLOR AND TRIM HU_MGU EXPERT MODE 3000 HMI_SPEECH TRIM_LINE MSPORTPAKET 3000 HMI_SPEECH VEHICLE_COLOUR # Fix Speedo running too high Instrument Cluster (DKOMBI4): BC_V_KORREKTUR mit_korrecktur --> ohne_korrektur # Fog light on with high beams (US default Off) BDC: NSW_AUS_BEI_FL active --> nict_active # Fog lights on with parking lights Body Domain Controller (BDC): NSW_EIN_AUF_LDS_STL nict_active --> active # Change logo displayed in Instrument Cluster Instrument Cluster (DKOMBI4): LOGO_SCHRIFTZUG (default) --> (any) 'kein_logo' to remove. BDC_BODY: VAM_HORN_AT_SECURE Disables the annoying horn honk if the car is running and you lock the doors. BDC_BODY: FesPiaDefaultLastUserMode Change normal driving mode, original is Comfort. # Fog lights on with parking lights Body Domain Controller (BDC): NSW_EIN_AUF_LDS_STL nict_active --> active "Body Domain Controller" aka BDC is the module in Bimmercode (BDCXXXX in eSys). "NSW_EIN_AUF_LDS_STL" is the FDL code, or the function to change. "nict_active --> active" by default, value is "nict_active", this needs to change to "active" # Fog lights on with parking lights Body Domain Controller (BDC): NSW_EIN_AUF_LDS_STL nict_active --> active "Body Domain Controller" aka BDC is the module in Bimmercode (BDCXXXX in eSys). "NSW_EIN_AUF_LDS_STL" is the FDL code, or the function to change. "nict_active --> active" by default, value is "nict_active", this needs to change to "active" Module = ACSM5 Branch = 3001 Gurtwarnung Item = SbrIwEnb Value = nicht_aktiv [00] (it is aktiv [01] from factory) HU_NBT2 / 3000 HMI / M_Vehicle_Setup & M_Menu & M_Inszenierung & MDrive_Config & MDRIVE BDC 3210_DG_3210 VCM_TYPE_VEHICLE G0001 (many options here) BDC 3210_DG_3210 VCM_TYPE_BODY SPORTS_ACTIVITY_VEHICLE 1. Go to HeadUnit (HU_NBT2) 2. Click "Expert" and accept that you are going to cause the next pandemic. 3a. Under 3000_HMI. Go to HIGH_END_AUDIO_B_UND_W. Change from "Kein_Menue" to "Volle_insz". 3b. Under 3000_HMI. Go to HIGH_END_AUDIO_MENUE. Change from "Kein_Menue" to "Volle_insz". 4a. Switch to 300B_Touch_Command. Go to TC_HIGH_END_AUDIO_B_UND_W. Change from "Kein_Menue" to "Volle_insz". DKOHMBI2 3000 display_configuration / ALPINA_ENABLE Nicht_Aktiv DKOHMBI2 3001 KI_Parameter / LOGO_SCHRIFTZUG m40i BDC: 3D01 RemoteControlIntegration -> RCI LOGO SELECT -> AG = BMW-Logo, MSP=M-Logo RE: G30 coding cheat sheet (request) - XuLeTZ - 05-05-2022 (03-05-2022, 16:02 PM)donjuan020 Wrote: Hello, I searched the forums, but I could not find the G30 coding list. I'm doing some coding with Bimmercode. I need the encoding list to be able to do the same encodings to the remote vehicle. Can you share about it? Here I have uploaded them translated RE: G30 coding cheat sheet (request) - Since1453 - 28-12-2022 Greetings my friends, I'm looking for the commands for the ambient lighting on a G30 Lci so I can recode the colors, who can help me RE: G30 coding cheat sheet (request) - TheNine90 - 29-12-2022 For ambient lighting there isnt a cheat sheet. You have to do it manually for each colour and trim you want to modify RE: G30 coding cheat sheet (request) - sabinglig - 29-12-2022 Here are some cheet sheets created by me for esys ultra for G30: -enable GiveAway for countries that don't have this feature enable (need 5at) -enable SLI after importing FSC -kombi to remain white at night -speed rate update of km/h to be more fluent on HUD and sport mode -lci tail light error HU_NBT2 - 3000HMI - SPEEDLOCK_FREISCHALTMENU - active After the encoding is completed and the NBT is rested,press the controller in up direction, without releasing the controller, press in turn MEDIA - MENU - MEDIA, a message appears. Select CD/MM: deactivate Speedlock. I am testing the codings for speed limit assist for countries that have this feature disabled, will post the results. For ambient light i use the link bellow. It is creted by one of the members, and i thank him for it. for heating steering wheel AKT_AUTO_LENKRADHEIZUNG: aktiv bdc CODDT_BYTE_00_LRE_LIN: LHZ_LRE_mit_TASTER CTRL_HOD_CODG_STWH_LIN: verbaut [01] LHZ_CCM_IKF: aktiv LIN_VARIANTE_LRE: lre_tlc_lhz_taster LRE_LHZ_VERBAUT: aktiv There are many more but i don't remember them right now. RE: G30 coding cheat sheet (request) - Since1453 - 29-12-2022 (29-12-2022, 10:04 AM)Does this link also work on the BDC 3 on the g30 LCI sabinglig Wrote: Here are some cheet sheets created by me for esys ultra for G30: RE: G30 coding cheat sheet (request) - sabinglig - 29-12-2022 yes you can upload bdc3 cafd as well on that link. RE: G30 coding cheat sheet (request) - Since1453 - 29-12-2022 (29-12-2022, 21:44 PM)what happens to the ones i haven\t changed because when i click on them they're all FFFFFF sabinglig Wrote: yes you can upload bdc3 cafd as well on that link. It's great that you can change the ambient lighting with it, but I would like to know where the individual commands are in the BDC3. I would be very grateful if someone would let me know |