[donjuan020]

Hello, I searched the forums, but I could not find the G30 coding list. I'm doing some coding with Bimmercode. I need the encoding list to be able to do the same encodings to the remote vehicle. Can you share about it?

respects.

I found the post of a Korean friend. I am sharing them in the attachment.

HERE WE CAN CREATE A CODING ARCHIVE FOR THE G-SERIES. I BELIEVE IT WILL BE A BEAUTIFUL ARCHIVE IF THE PROFESSIONALS SUPPORT IT.

[donjuan020]

Add G20 Coding cheat sheet.

[donjuan020]

M Font and Logo

DKombi4
Expert Mode
3001 KI_Parameter
AG_MPA_MSP_VIEW
MPA_ANSICHT_260_SKALA

LOGO

3001 KI_PARAMETER
LOGO_SCHRIFTZUG
MSP_LOGO

CAR COLOR AND TRIM

HU_MGU
EXPERT MODE
3000 HMI_SPEECH
TRIM_LINE
MSPORTPAKET

3000 HMI_SPEECH
VEHICLE_COLOUR

# Fix Speedo running too high

Instrument Cluster (DKOMBI4): BC_V_KORREKTUR mit_korrecktur --> ohne_korrektur

# Fog light on with high beams (US default Off)
BDC: NSW_AUS_BEI_FL active --> nict_active

# Fog lights on with parking lights
Body Domain Controller (BDC): NSW_EIN_AUF_LDS_STL nict_active --> active

# Change logo displayed in Instrument Cluster
Instrument Cluster (DKOMBI4): LOGO_SCHRIFTZUG (default) --> (any) 'kein_logo' to remove.


BDC_BODY: VAM_HORN_AT_SECURE

Disables the annoying horn honk if the car is running and you lock the doors.

BDC_BODY: FesPiaDefaultLastUserMode
Change normal driving mode, original is Comfort.



# Fog lights on with parking lights

Body Domain Controller (BDC): NSW_EIN_AUF_LDS_STL nict_active --> active


"Body Domain Controller" aka BDC is the module in Bimmercode (BDCXXXX in eSys).



"NSW_EIN_AUF_LDS_STL" is the FDL code, or the function to change.


"nict_active --> active" by default, value is "nict_active", this needs to change to "active"



# Fog lights on with parking lights

Body Domain Controller (BDC): NSW_EIN_AUF_LDS_STL nict_active --> active


"Body Domain Controller" aka BDC is the module in Bimmercode (BDCXXXX in eSys).



"NSW_EIN_AUF_LDS_STL" is the FDL code, or the function to change.


"nict_active --> active" by default, value is "nict_active", this needs to change to "active"



Module = ACSM5

Branch = 3001 Gurtwarnung

Item = SbrIwEnb
Value = nicht_aktiv [00] (it is aktiv [01] from factory)



HU_NBT2 / 3000 HMI / M_Vehicle_Setup & M_Menu & M_Inszenierung & MDrive_Config & MDRIVE



BDC 3210_DG_3210 VCM_TYPE_VEHICLE G0001 (many options here)
BDC 3210_DG_3210 VCM_TYPE_BODY SPORTS_ACTIVITY_VEHICLE



1. Go to HeadUnit (HU_NBT2)

2. Click "Expert" and accept that you are going to cause the next pandemic.

3a. Under 3000_HMI. Go to HIGH_END_AUDIO_B_UND_W. Change from "Kein_Menue" to "Volle_insz".

3b. Under 3000_HMI. Go to HIGH_END_AUDIO_MENUE. Change from "Kein_Menue" to "Volle_insz".
4a. Switch to 300B_Touch_Command. Go to TC_HIGH_END_AUDIO_B_UND_W. Change from "Kein_Menue" to "Volle_insz".



DKOHMBI2 3000 display_configuration / ALPINA_ENABLE Nicht_Aktiv
DKOHMBI2 3001 KI_Parameter / LOGO_SCHRIFTZUG m40i



BDC: 3D01 RemoteControlIntegration -> RCI LOGO SELECT -> AG = BMW-Logo, MSP=M-Logo

[XuLeTZ]

Hello, I searched the forums, but I could not find the G30 coding list. I'm doing some coding with Bimmercode. I need the encoding list to be able to do the same encodings to the remote vehicle. Can you share about it?

respects.

I found the post of a Korean friend. I am sharing them in the attachment.

HERE WE CAN CREATE A CODING ARCHIVE FOR THE G-SERIES. I BELIEVE IT WILL BE A BEAUTIFUL ARCHIVE IF THE PROFESSIONALS SUPPORT IT.

Here I have uploaded them translated

[Since1453]

Greetings my friends, I'm looking for the commands for the ambient lighting on a G30 Lci so I can recode the colors, who can help me

[TheNine90]

For ambient lighting there isnt a cheat sheet. You have to do it manually for each colour and trim you want to modify

[sabinglig]

Here are some cheet sheets created by me for esys ultra for G30:
-enable GiveAway for countries that don't have this feature enable (need 5at)
-enable SLI after importing FSC
-kombi to remain white at night
-speed rate update of km/h to be more fluent on HUD and sport mode
-lci tail light error

HU_NBT2 - 3000HMI - SPEEDLOCK_FREISCHALTMENU - active

After the encoding is completed and the NBT is rested,press the controller in up direction, without releasing the controller, press in turn MEDIA - MENU - MEDIA,
a message appears.
Select CD/MM: deactivate Speedlock.

I am testing the codings for speed limit assist for countries that have this feature disabled, will post the results.

---

For ambient light i use the link bellow. It is creted by one of the members, and i thank him for it.

for heating steering wheel
AKT_AUTO_LENKRADHEIZUNG: aktiv


bdc 
CODDT_BYTE_00_LRE_LIN: LHZ_LRE_mit_TASTER
CTRL_HOD_CODG_STWH_LIN: verbaut [01]
LHZ_CCM_IKF: aktiv
LIN_VARIANTE_LRE: lre_tlc_lhz_taster
LRE_LHZ_VERBAUT: aktiv

There are many more but i don't remember them right now.

[Since1453]

Here are some cheet sheets created by me for esys ultra for G30:
-enable GiveAway for countries that don't have this feature enable (need 5at)
-enable SLI after importing FSC
-kombi to remain white at night
-speed rate update of km/h to be more fluent on HUD and sport mode
-lci tail light error

HU_NBT2 - 3000HMI - SPEEDLOCK_FREISCHALTMENU - active

After the encoding is completed and the NBT is rested,press the controller in up direction, without releasing the controller, press in turn MEDIA - MENU - MEDIA,
a message appears.
Select CD/MM: deactivate Speedlock.

I am testing the codings for speed limit assist for countries that have this feature disabled, will post the results.

---

For ambient light i use the link bellow. It is creted by one of the members, and i thank him for it.

for heating steering wheel
AKT_AUTO_LENKRADHEIZUNG: aktiv


bdc 
CODDT_BYTE_00_LRE_LIN: LHZ_LRE_mit_TASTER
CTRL_HOD_CODG_STWH_LIN: verbaut [01]
LHZ_CCM_IKF: aktiv
LIN_VARIANTE_LRE: lre_tlc_lhz_taster
LRE_LHZ_VERBAUT: aktiv

There are many more but i don't remember them right now.

[sabinglig]

yes you can upload bdc3 cafd as well on that link.

[Since1453]

yes you can upload bdc3 cafd as well on that link.

---

It's great that you can change the ambient lighting with it, but I would like to know where the individual commands are in the BDC3.
I would be very grateful if someone would let me know