+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: MCU MC68HCP11E1 (/showthread.php?tid=64155)
MCU MC68HCP11E1 - galisdoo - 04-05-2022
Hi to all,
can anybody help me how to read MCU MC68HCP11E1VFN with carprog or upa. Need immo off laguna 1. I try but with no succes. For upa does need external power or not, and adapter type, I see four pics same 13*13. Carprog also with power adapter or not, I supose A10 cable but not sure for pinout.
Best regards
RE: MCU MC68HCP11E1 - BobbySD - 04-05-2022
for this you will definitely need external power for both of the programmers. I cannot help you with connection but for upa im using standard bga cable stripped. You just need to find datasheet for this mcu and upa will tell you which pin is what. For example pin 5 VCC - in datasheet you will find that on this mcu vcc is pin 34. (not true, just for example). And in this way you can connect it.
RE: MCU MC68HCP11E1 - zmann - 04-05-2022
Did you read it on adapter ?
RE: MCU MC68HCP11E1 - galisdoo - 04-05-2022
(04-05-2022, 16:16 PM)zmann Wrote: Did you read it on adapter ?
Yes i will try with Type 9 but not success. I not use externel power maybe burn mcu, i dont know.
Best regards
(04-05-2022, 15:52 PM)BobbySD Wrote: for this you will definitely need external power for both of the programmers. I cannot help you with connection but for upa im using standard bga cable stripped. You just need to find datasheet for this mcu and upa will tell you which pin is what. For example pin 5 VCC - in datasheet you will find that on this mcu vcc is pin 34. (not true, just for example). And in this way you can connect it.
I see something similar.
RE: MCU MC68HCP11E1 - Red_Mango - 04-05-2022
upa reads this fine without external power,try cleaning very very carefully the mcu pins,most of the time this is the issue
Hc11 adapter should be i think type 6
RE: MCU MC68HCP11E1 - galisdoo - 04-05-2022
(04-05-2022, 18:15 PM)Red_Mango Wrote: upa reads this fine without external power,try cleaning very very carefully the mcu pins,most of the time this is the issue
Hc11 adapter should be i think type 6
I desolder and clean but not try with another type. I see datasheet it is similar like mc68HC11A8, A1, A0, it is try or not.
BR
RE: MCU MC68HCP11E1 - lupu_sandu - 05-05-2022
Lift RST Rx and Tx
RE: MCU MC68HCP11E1 - galisdoo - 05-05-2022
(05-05-2022, 08:23 AM)lupu_sandu Wrote: Lift RST Rx and Tx
I read with carpog like HC11A1, anzbody immo off solution for this ecu Siemens S101727104 HOM7700860316 BVA/BVM.