+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Car Technology Motorbikes Forums (https://cartechnology.co.uk/forumdisplay.php?fid=23)
+--- Forum: Motorbikes Softwares & Workshop Manuals (https://cartechnology.co.uk/forumdisplay.php?fid=36)
+---- Forum: BMW (https://cartechnology.co.uk/forumdisplay.php?fid=126)
+---- Thread: ISTA: Data status (integration level) error message (/showthread.php?tid=68705)
Pages:
1
2
ISTA: Data status (integration level) error message - Rememo - 07-09-2022
Hello everyone.
I have a 2018 R1200GS. Using ISTA 4.32, I was able to accidentally flash software that caused a "no communication with engine control" error message. There are no stored codes, just that error message.
I reconnected my laptop to flash a different version of software to the bike, but I received the following error message:
"The connected vehicle has an unknown data status (works integration level: K001-17-07-513, actual integration level: K001-22-07-506)
This status cannot be processed with ISTA.
Make sure the latest version of ISTA has been installed or contact Technical Support."
Is there a way to determine which version of ISTA is required for K001-22-07-506?
Thank you.
RE: ISTA: Data status (integration level) error message - Beard - 08-09-2022
Hello.
After the firmware, does the motor work?
ISTA will no longer help you. ESYS required.
First you need to find a connection with the DME unit.
If you don't know what you're doing, trust your technique to another person who does. Fixing is always harder and more expensive.
RE: ISTA: Data status (integration level) error message - BMWzone - 08-09-2022
I have same message on TFT "No Communication with DME..." I haven't problems about integration Level or unknown status, I made flash with esys and I Step 4.36.40, tryed different firmware (no downgrade) and total re write included BTLD, no changes, it's the same bike as yours.
The motorcycle has a broken exhaust gas actuator in next days it will be changed, also I will upload a 2018 IStep, other step is clone DME if not solve
RE: ISTA: Data status (integration level) error message - Rememo - 09-09-2022
(08-09-2022, 05:45 AM)Beard Wrote: Hello.
After the firmware, does the motor work?
ISTA will no longer help you. ESYS required.
First you need to find a connection with the DME unit.
If you don't know what you're doing, trust your technique to another person who does. Fixing is always harder and more expensive.
Thank you for the information, Beard. The bike still runs fine.
I'm comfortable with ISTA, but now it sound like I'll have to research ESYS.
(08-09-2022, 06:02 AM)BMWzone Wrote: I have same message on TFT "No Communication with DME..." I haven't problems about integration Level or unknown status, I made flash with esys and I Step 4.36.40, tryed different firmware (no downgrade) and total re write included BTLD, no changes, it's the same bike as yours.
The motorcycle has a broken exhaust gas actuator in next days it will be changed, also I will upload a 2018 IStep, other step is clone DME if not solve
Ouch. That doesn't sound good for either of us.
I'm disappointed that ISTA would allow me to flash a file that it couldn't handle after I flashed it. It was my own mistake, but...
RE: ISTA: Data status (integration level) error message - Node - 09-09-2022
How is ISTA and NOT YOU responsible if you use it in the ways it was never meant to be used????
4.32 ISTA was released in 2021. You flashed iStep of late 2022!!! The ONLY way that is possible if using OLD ISTA with MUCH NEWER psdzdata!!! Did ISTA itself suddenly managed to update it's psdzdata to such level JUST BY ITSELF??? You should really stop blaming something else for YOUR OWN deeds...
Use proper ISTA for that level and you will have no problems!!!! Old ISTA simply DOESN'T HAVE proper prg files to deal with such new iStep.
RE: ISTA: Data status (integration level) error message - SebSeb0404 - 09-09-2022
Let me know if i can help you with ESYS and your problem, we do a lot of bikes BMW here. Flash a valif ISTEP with ESYS and your problem should be solved. Flashing TFT and Telematics Module takes a lot of time!
RE: ISTA: Data status (integration level) error message - Rememo - 09-09-2022
(09-09-2022, 06:43 AM)Node Wrote: How is ISTA and NOT YOU responsible if you use it in the ways it was never meant to be used????
4.32 ISTA was released in 2021. You flashed iStep of late 2022!!! The ONLY way that is possible if using OLD ISTA with MUCH NEWER psdzdata!!! Did ISTA itself suddenly managed to update it's psdzdata to such level JUST BY ITSELF??? You should really stop blaming something else for YOUR OWN deeds...
Use proper ISTA for that level and you will have no problems!!!! Old ISTA simply DOESN'T HAVE proper prg files to deal with such new iStep.
I already said it was my mistake. But I don't believe that a 2021 version of ISTA should allow for the flashing of 2022 psdzdata files. It's just bad programming practice. I'd be fired for allowing users to do something like that.
(09-09-2022, 07:41 AM)SebSeb0404 Wrote: Let me know if i can help you with ESYS and your problem, we do a lot of bikes BMW here. Flash a valif ISTEP with ESYS and your problem should be solved. Flashing TFT and Telematics Module takes a lot of time!
You sir, are awesome. I will probably take you up on the offer, and owe you a beer afterwards.
RE: ISTA: Data status (integration level) error message - Node - 09-09-2022
(09-09-2022, 18:38 PM)Rememo Wrote: I already said it was my mistake. But I don't believe that a 2021 version of ISTA should allow for the flashing of 2022 psdzdata files. It's just bad programming practice. I'd be fired for allowing users to do something like that.
WHY would it do that??? If files are there and it understands them, then what's the problem??? AFAIK many users here like using old ISTAs with newest psdzdatas and would be very unhappy if that was not allowed...
RE: ISTA: Data status (integration level) error message - Rememo - 09-09-2022
(09-09-2022, 18:47 PM)Node Wrote:(09-09-2022, 18:38 PM)Rememo Wrote: I already said it was my mistake. But I don't believe that a 2021 version of ISTA should allow for the flashing of 2022 psdzdata files. It's just bad programming practice. I'd be fired for allowing users to do something like that.
WHY would it do that??? If files are there and it understands them, then what's the problem??? AFAIK many users here like using old ISTAs with newest psdzdatas and would be very unhappy if that was not allowed...
Thank you for all of your help.
RE: ISTA: Data status (integration level) error message - AdiP - 10-09-2022
Install latest ISTA and see if error still there. If so, ESYS and reflash.