+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: 【
Pages:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
RE: [Diagnostic] Dr.Gini - B021 - 14.06.2017 - lked - 27-06-2017
(27-06-2017, 17:29 PM)snypertje Wrote: I now work with Dr. Gini B014 and that works very easy With Icom A2.
Can anyone explain how FSC works with Dr. Gini B021.
I would like to know how it works, becaus B014 does not work with Icom Next.
What do you want to know exactly?
After you cleared CIC with USB-Patch:
Read ECUs at "Identification", check for ECU Adress of CIC, insert in tab "Units" on top (select FSC on left side if not selected). Enter ECU Adress on top (first row) and press status. Then you will see below the different 9C, 1B, and so on... At this point you can "Write VIN" if needed.
Select the FSC you want to change. Select at "Certificates" section in drop-down "SIGS", load certificate (below small icon), write certificate.
Same with "FSCS". Then at "FSC" Section (on top left) you can Open your generated FSC and write it. Done! Repeat for other FSCs.
Hope it helped
RE: [Diagnostic] Dr.Gini - B021 - 14.06.2017 - Bimmer540 - 28-06-2017
But it is more difficult than with B014. Is it possible to get B014 running with Icom Next?
RE: [Diagnostic] Dr.Gini - B021 - 14.06.2017 - Twoone - 28-06-2017
(28-06-2017, 05:38 AM)snypertje Wrote: But it is more difficult than with B014. Is it possible to get B014 running with Icom Next?Hoi Snypertje
Yes is possible. I use also B14 for getting 1B and DE file with my icom next.
I use easy connect. Set Ip of icom , choose REMOTE ,choose obd asynch, lock icom.
After that start dr gini and do identification and al should be fine.
RE: [Diagnostic] Dr.Gini - B021 - 14.06.2017 - Gini - 28-06-2017
Http://cartechnology.co.uk/showthread.php?tid=7023&pid=252589#pid252589
http://cartechnology.co.uk/showthread.php?tid=24973&pid=252646#pid252646
RE: [Diagnostic] Dr.Gini - B021 - 14.06.2017 - atomantmk - 28-06-2017
Someone to tell what is here problem?
29;;;;41;;ERROR_ECU_SUBFUNCTION_NOT_SUPPORTED__INVALID_FORMAT;83,F1,29,7F,1A,12,48;;DSC
I have reseted module but there is still problem with Flat Tyre Monitor.
RE: [Diagnostic] Dr.Gini - B021 - 14.06.2017 - Skid1164 - 06-07-2017
Hi Gini,
new donation from me: 84L45329RK8889308
RE: [Diagnostic] Dr.Gini - B021 - 14.06.2017 - Bimmer540 - 06-07-2017
I now work with Dr. Gini B014 and that works very easy With Icom A2.
Can anyone explain how FSC works with Dr. Gini B021 incl Icom Next or,
if B014 does work with Icom Next and how to setup.
RE: [Diagnostic] Dr.Gini - B021 - 14.06.2017 - Gini - 06-07-2017
Post #1104
Http://cartechnology.co.uk/showthread.php?tid=7023&pid=255570#pid255570
B021 works with all ICOMs, ENET, PASSTHRU and K+DCAN
It can read and write FSC and certificates in ESeries
RE: [Diagnostic] Dr.Gini - B021 - 14.06.2017 - MaxBmw - 06-07-2017
Hi Gini
I have such an error when turning on Gini B021?
"File corrupted!.This program has been manipulated and maybe
it's infected by a virus or cracked. This file won't work anymore"
RE: [Diagnostic] Dr.Gini - B021 - 14.06.2017 - volavka - 06-07-2017
(06-07-2017, 17:14 PM)MaxBmw Wrote: Hi Gini
I have such an error when turning on Gini B021?
"File corrupted!.This program has been manipulated and maybe
it's infected by a virus or cracked. This file won't work anymore"
run cmd write
cd..
cd..
attrib
you will see the famous exe killer autorun.inf virus
