[lked]

I now work with Dr. Gini B014 and that works very easy With Icom A2.


Can anyone explain how FSC works with Dr. Gini B021.


I would like to know how it works, becaus B014 does not work with Icom Next.

What do you want to know exactly?


After you cleared CIC with USB-Patch:
Read ECUs at "Identification", check for ECU Adress of CIC, insert in tab "Units" on top (select FSC on left side if not selected). Enter ECU Adress on top (first row) and press status. Then you will see below the different 9C, 1B, and so on... At this point you can "Write VIN" if needed.

Select the FSC you want to change. Select at "Certificates" section in drop-down "SIGS", load certificate (below small icon), write certificate.
Same with "FSCS". Then at "FSC" Section (on top left) you can Open your generated FSC and write it. Done! Repeat for other FSCs.

Hope it helped

[Bimmer540]

But it is more difficult than with B014. Is it possible to get B014 running with Icom Next?

[Twoone]

But it is more difficult than with B014. Is it possible to get B014 running with Icom Next?

Hoi Snypertje

Yes is possible. I use also B14 for getting 1B and DE file with my icom next.

I use easy connect. Set Ip of icom , choose REMOTE ,choose obd asynch, lock icom.

After that start dr gini and do identification and al should be fine.

[Gini]

Http://cartechnology.co.uk/showthread.ph...#pid252589

---

http://cartechnology.co.uk/showthread.ph...#pid252646

[atomantmk]

Someone to tell what is here problem?

29;;;;41;;ERROR_ECU_SUBFUNCTION_NOT_SUPPORTED__INVALID_FORMAT;83,F1,29,7F,1A,12,48;;DSC

I have reseted module but there is still problem with Flat Tyre Monitor.

[Skid1164]

Hi Gini,
new donation from me: 84L45329RK8889308

[Bimmer540]

I now work with Dr. Gini B014 and that works very easy With Icom A2.


Can anyone explain how FSC works with Dr. Gini B021 incl Icom Next or,


if B014 does work with Icom Next and how to setup.

[Gini]

Post #1104
Http://cartechnology.co.uk/showthread.ph...#pid255570

B021 works with all ICOMs, ENET, PASSTHRU and K+DCAN
It can read and write FSC and certificates in ESeries

[MaxBmw]

Hi Gini
I have such an error when turning on Gini B021?

"File corrupted!.This program has been manipulated and maybe
it's infected by a virus or cracked. This file won't work anymore"

[volavka]

Hi Gini
I have such an error when turning on Gini B021?

"File corrupted!.This program has been manipulated and maybe
it's infected by a virus or cracked. This file won't work anymore"

run cmd write
cd..
cd..
attrib

you will see the famous exe killer autorun.inf virus