Solved ✔ e60 CIC FSC Upgrade to new vin - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Solved ✔ e60 CIC FSC Upgrade to new vin (/showthread.php?tid=71870) Pages:
1
2
|
e60 CIC FSC Upgrade to new vin - mcrussell - 22-11-2022 I have an e60 CIC with an aftermarket FSC set installed, however I want to put the unit in another car, is there a way to upgrade the FSC set without flashing the unit as the failure rate of these units with WinKFP is too high for me to risk. RE: e60 CIC FSC Upgrade to new vin - atomantmk - 22-11-2022 No, reflash and patch again, import all FSC. RE: e60 CIC FSC Upgrade to new vin - Matthew53 - 22-11-2022 Everything is possible, depend of the skills. You'd need to virginize unit via FTP and then apply new FSC set. Not worth to go that way. There is no high failure risk if you use genuine ICOM A + B. RE: e60 CIC FSC Upgrade to new vin - mcrussell - 22-11-2022 Thanks for the replies, I have a USB/ENT interface so I could FTP in as the units on 2.41 sw but I didnt think FTP access deleted the sig certs, only the FSCs RE: e60 CIC FSC Upgrade to new vin - Matthew53 - 22-11-2022 (22-11-2022, 20:38 PM)mcrussell Wrote: Thanks for the replies, I have a USB/ENT interface so I could FTP in as the units on 2.41 sw but I didnt think FTP access deleted the sig certs, only the FSCs I think it would be possible to delete sig cert too via FTP, but I couldn't find informations about that and I didn't care since I always flash the HU if I want to put it to another car RE: e60 CIC FSC Upgrade to new vin - mcrussell - 22-11-2022 I have a genuine ICOM A & B but have no faith in WinKFP, I've had "Security Access Denied" errors in the past RE: e60 CIC FSC Upgrade to new vin - Matthew53 - 22-11-2022 (22-11-2022, 20:43 PM)mcrussell Wrote: I have a genuine ICOM A & B but have no faith in WinKFP, I've had "Security Access Denied" errors in the past You can always make a backup of BGA chips GL512, but of course it require BGA skills, so I think it's not the way you'd like to go. If WinKFP settings will be ok and you will connect good power supply, then I think you should not be afraid of flashing RE: e60 CIC FSC Upgrade to new vin - mcrussell - 22-11-2022 I have an ELTEK 40a PSU as used in bmw dealers a few years back, could you confirm WinKFP settings as I have never changed them since bmw tools install RE: e60 CIC FSC Upgrade to new vin - EuroCSL - 22-11-2022 You can PM teamviewer and I can for you RE: e60 CIC FSC Upgrade to new vin - ____ANGEL___ - 22-11-2022 (22-11-2022, 20:30 PM)atomantmk Wrote: No, reflash and patch again, import all FSC. Yes there is, generate new set and edit the fsc date, change vin and job done. Fstool can easily do this job |