N46 swap to N54 CAS and FA questions - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: N46 swap to N54 CAS and FA questions (/showthread.php?tid=72349) Pages:
1
2
|
N46 swap to N54 CAS and FA questions - lacost - 05-12-2022 Hi, I swap N46 to N54 on my 1-ser I had UL51 (N46B20) and VIN starts with WBAUL51 And the new N54 goes like UN91 (and my VIN should start WBAUN91) What is the best practice for modifying FA? RE: N46 swap to N54 CAS and FA questions - bmchicago - 05-12-2022 change Type code in FA from UL51 - E88 120i N46T to UN91 - E88 135i N54 Manual Transmission or UN01 - E88 135i N54 Automatic Transmission and write changes to FRM and CAS ISTA may complain based on VIN also. RE: N46 swap to N54 CAS and FA questions - lacost - 05-12-2022 I've made E88_*UN91 in FA But Ista still see N46 and MEV ecu RE: N46 swap to N54 CAS and FA questions - bmchicago - 05-12-2022 sometimes ISTA will remember the old control units. Try a different computer with ISTA installed that you never connected to. If still the same, you may need to use Dummy VIN RE: N46 swap to N54 CAS and FA questions - Node - 05-12-2022 IMHO ISTA "remembers" in the HKEY_CURRENT_USER\SOFTWARE\BMWGroup\ISPI\Rheingold\Persistency registry key by VIN. It should be enough to delete it if it exists. But it also has ranges of VINs mapped to certain parameters in it's database. So, you may still need to use dummy VIN. RE: N46 swap to N54 CAS and FA questions - lacost - 06-12-2022 I don't have 'Persistency' in HKEY_CURRENT_USER\SOFTWARE\BMWGroup\ISPI\Rheingold\Persistency In ista-logs i see that software search info in its DB using VIN What do you mean "dummy VIN"? Is it some kind of special VIN? or what? RE: N46 swap to N54 CAS and FA questions - willisodhiambo - 07-12-2022 I don't understand what you are trying to do. You must change VIN for ista to see the right car not just type code. RE: N46 swap to N54 CAS and FA questions - Tombo - 07-12-2022 I would use donor CAS too. Next problem will be power class and incorrect data record RE: N46 swap to N54 CAS and FA questions - lacost - 07-12-2022 (07-12-2022, 06:51 AM)willisodhiambo Wrote: I don't understand what you are trying to do. You must change VIN for ista to see the right car not just type code.I changed engine on the car and whant to know: is it possibe to keep (in cas, kombi, dme) old vin or i should change vin to new (from new engins car)? I can change vin on all ecus - it's not my problem. I've never changed an engine type before (in thisĀ case not only power class, but also the ecu type) and don't know about all the steps that will need to be done in FA and vin. RE: N46 swap to N54 CAS and FA questions - larshutten - 07-12-2022 No ista will look in its database and determines from typekey which engine should be there linked to your vin number. Not sure how your MOT is if they have to check digital vin compared to physical vin you have an issue. Ista-p on the other hand does read the stored/edited type key and will show you correct engine |