G31 Retrofit Tail Lights - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: G31 Retrofit Tail Lights (/showthread.php?tid=74655) |
G31 Retrofit Tail Lights - DieStream - 02-02-2023 Hello Guys, G31 get LCI tail lights. iStep Update from 18-03 to 22-11 Add HELC to FA and coded The car says the rear turn signals are shorted. i try this parameters: BL_L_CCM: ccm_346 [01 5A] BL_L_IS_LED: nicht_aktiv, default [00] BL_L_MIN_PWM: 5% [05] BL_L_WARMUEBERWACHUNG: nicht_aktiv [00] BL_R_CCM: ccm_345 [01 59] BL_R_IS_LED: nicht_aktiv, default [00] BL_R_MIN_PWM: 5% [05] BL_R_WARMUEBERWACHUNG: nicht_aktiv [00] but doesnt work. Anyone have an idea, what i can do? RE: G31 Retrofit Tail Lights - zeronoo - 02-02-2023 Done this several times G30 and G31. Wiring, istep update and HELC was enough every time. Check wiring one more time... RE: G31 Retrofit Tail Lights - abrek - 03-02-2023 You don't need this coding. Just add helc and that's it. Like @zeronoo said check the wiring. RE: G31 Retrofit Tail Lights - Timbits93 - 03-02-2023 Check your wiring. I believe there’s an extra pin & likely change in pinning on the LCI inner taillights due to the addition of the brake light function. RE: G31 Retrofit Tail Lights - DieStream - 04-02-2023 Wiring was okay. HELC was added. I removed the turn signal and brake light monitoring and after that it works great. RE: G31 Retrofit Tail Lights - zygi898 - 05-02-2023 (04-02-2023, 03:36 AM)DieStream Wrote: Wiring was okay. HELC was added. I removed the turn signal and brake light monitoring and after that it works great. Can you add what FDL was for that? RE: G31 Retrofit Tail Lights - DieStream - 05-02-2023 (05-02-2023, 15:26 PM)zygi898 Wrote:(04-02-2023, 03:36 AM)DieStream Wrote: Wiring was okay. HELC was added. I removed the turn signal and brake light monitoring and after that it works great. BL_H_L BL_H_R FRA_H_L FRA_H_R Warm and Kaltüberwachung deactivate and remove the short-circuit lockout in ISTA |