Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
G31 Retrofit Tail Lights
02-02-2023, 14:29 PM,
Post: #1
|
|||
|
|||
G31 Retrofit Tail Lights
Hello Guys,
G31 get LCI tail lights. iStep Update from 18-03 to 22-11 Add HELC to FA and coded The car says the rear turn signals are shorted. i try this parameters: BL_L_CCM: ccm_346 [01 5A] BL_L_IS_LED: nicht_aktiv, default [00] BL_L_MIN_PWM: 5% [05] BL_L_WARMUEBERWACHUNG: nicht_aktiv [00] BL_R_CCM: ccm_345 [01 59] BL_R_IS_LED: nicht_aktiv, default [00] BL_R_MIN_PWM: 5% [05] BL_R_WARMUEBERWACHUNG: nicht_aktiv [00] but doesnt work. Anyone have an idea, what i can do? |
|||
02-02-2023, 20:03 PM,
Post: #2
|
|||
|
|||
RE: G31 Retrofit Tail Lights
Done this several times G30 and G31. Wiring, istep update and HELC was enough every time. Check wiring one more time...
|
|||
03-02-2023, 22:23 PM,
Post: #3
|
|||
|
|||
RE: G31 Retrofit Tail Lights
You don't need this coding. Just add helc and that's it. Like @zeronoo said check the wiring.
|
|||
03-02-2023, 22:44 PM,
Post: #4
|
|||
|
|||
RE: G31 Retrofit Tail Lights
Check your wiring. I believe there’s an extra pin & likely change in pinning on the LCI inner taillights due to the addition of the brake light function.
|
|||
04-02-2023, 03:36 AM,
Post: #5
|
|||
|
|||
RE: G31 Retrofit Tail Lights
Wiring was okay. HELC was added. I removed the turn signal and brake light monitoring and after that it works great.
|
|||
05-02-2023, 15:26 PM,
Post: #6
|
|||
|
|||
RE: G31 Retrofit Tail Lights
|
|||
05-02-2023, 21:17 PM,
Post: #7
|
|||
|
|||
RE: G31 Retrofit Tail Lights
(05-02-2023, 15:26 PM)zygi898 Wrote:(04-02-2023, 03:36 AM)DieStream Wrote: Wiring was okay. HELC was added. I removed the turn signal and brake light monitoring and after that it works great. BL_H_L BL_H_R FRA_H_L FRA_H_R Warm and Kaltüberwachung deactivate and remove the short-circuit lockout in ISTA |
|||
Reputation: +1 - zygi898 [+1] | |||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content