+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: E6 seies a way to edit the vin module from ÿÿÿÿÿ or 0000 to my vin ? ^^ (/showthread.php?tid=78829)
Pages:
1
2
E6 seies a way to edit the vin module from ÿÿÿÿÿ or 0000 to my vin ? ^^ - Fraizer - 13-05-2023
hello
Is a way to edit the vin modules from ÿÿÿÿÿ or 0000 to car my vin ? ^^
i have an E64
i try to do it with ista-p but no sucess ^^
RE: E6 seies a way to edit the vin module from ÿÿÿÿÿ or 0000 to my vin ? ^^ - AZCKNCLLC - 13-05-2023
What modules are you trying to edit?
RE: E6 seies a way to edit the vin module from ÿÿÿÿÿ or 0000 to my vin ? ^^ - Mwahab - 13-05-2023
Some modules can be edited
Gini or tool32
FG_lessen to read curretn vin
FG_schribein to write the vin u want with checksum letter
AIF_Lessen
AIF_schribein you have to write some parameters with it, not only the vin, u can see what it needs in job description
for the modules u can't change the AIF, u need to flash it.
RE: E6 seies a way to edit the vin module from ÿÿÿÿÿ or 0000 to my vin ? ^^ - Fraizer - 13-05-2023
hi guys
the modules are:
-----------------------------
LDM/ICM = yyyyyyy
ACC = yyyyyy
DSC = 000000
TEL/MULF = yyyyyy
AMP = yyyyyyy
HUD =yyyyy
NVE = yyyyyy
TLC/KAFAS =yyyyyy
FLA = yyyyyy
CID = yyyyyy
VIRTSG92 = yyyyy
-----------------------------
i retrofit many option as lan departure assist, HUD, ACC stop and go, SZL with heating, Night vision (with module emulator).
2nd hands from ebay, i always try to catch the last revisions regarding date and those who end after part numbers with -1 or -2. some was on 1st F series
RE: E6 seies a way to edit the vin module from ÿÿÿÿÿ or 0000 to my vin ? ^^ - jararak - 14-05-2023
you can do this with winkfp, when you prepare your flash, you write also vin there
but 0 or y are also good and rather leave it as it is
RE: E6 seies a way to edit the vin module from ÿÿÿÿÿ or 0000 to my vin ? ^^ - Fraizer - 14-05-2023
(13-05-2023, 19:07 PM)Mwahab Wrote: Some modules can be edited
Gini or tool32
FG_lessen to read curretn vin
FG_schribein to write the vin u want with checksum letter
AIF_Lessen
AIF_schribein you have to write some parameters with it, not only the vin, u can see what it needs in job description
for the modules u can't change the AIF, u need to flash it.
i post above all my vin yyyy and 000 ^^
can you tell if i can edit all of them ?
for how to change the vin can i do on all those without it make problems ?
it will be great if you have tutorial because i found nothing... on tool32 i found a link for cic but im lost about what prg i need to select, look i need to change the vin everytimes in 2 prg files if i get...
RE: E6 seies a way to edit the vin module from ÿÿÿÿÿ or 0000 to my vin ? ^^ - Node - 14-05-2023
Some units CAN'T store VIN. In such cases you read that as ÿ or 0. AFAIR CID is one of them (don't do much work of E anymore). Probably others too.
Just leave them be if you have no faults.
RE: E6 seies a way to edit the vin module from ÿÿÿÿÿ or 0000 to my vin ? ^^ - Fraizer - 14-05-2023
hi Node
my friend who have the same car and option than me have most of those with his true VIN of his car as the HUD, tel/mulf amp etc but not me
RE: E6 seies a way to edit the vin module from ÿÿÿÿÿ or 0000 to my vin ? ^^ - Node - 14-05-2023
That also depends on HOW you read those VINs quite MUCH!!! Are you reading AIF data? Then you need either to manually write AIF (not that elementary thing to do manually) or flash everything with AIF write enabled.
RE: E6 seies a way to edit the vin module from ÿÿÿÿÿ or 0000 to my vin ? ^^ - Mwahab - 14-05-2023
(14-05-2023, 16:12 PM)Fraizer Wrote:I am sorry bro, you need to pay someone to do it for you.(13-05-2023, 19:07 PM)Mwahab Wrote: Some modules can be edited
Gini or tool32
FG_lessen to read curretn vin
FG_schribein to write the vin u want with checksum letter
AIF_Lessen
AIF_schribein you have to write some parameters with it, not only the vin, u can see what it needs in job description
for the modules u can't change the AIF, u need to flash it.
i post above all my vin yyyy and 000 ^^
can you tell if i can edit all of them ?
for how to change the vin can i do on all those without it make problems ?
it will be great if you have tutorial because i found nothing... on tool32 i found a link for cic but im lost about what prg i need to select, look i need to change the vin everytimes in 2 prg files if i get...