MED17.5.5 iimmo transfered coding problem - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9) +--- Thread: MED17.5.5 iimmo transfered coding problem (/showthread.php?tid=80684) |
MED17.5.5 iimmo transfered coding problem - immokill - 30-06-2023 Hello I have problem with GOLF 6 1.4 TSI Changed ecu and changed immo data in eeprom car starts but I can not change coding . Donor ecu is DSG (coding 77) original ecu is coding 72 , I cant change it and ESP lisgh is ON Ecu are same numbers indentical but did not know that it is from dsg car. Here are original, donor and immo data transfered files int eep and int flash Please help me , What is solution ? Thanks Regards RE: MED17.5.5 iimmo transfered coding problem - sixcode - 30-06-2023 you need to flash donor with ori flash file..... RE: MED17.5.5 iimmo transfered coding problem - immokill - 30-06-2023 Now my original ecu wontt start .error : Ecu not authirised! do you mean flash by obd? thanks I started original ecu must put all with vvdi2 and car starts No will clone eeprom write and oriinal flash do I need to write original flash via OBD ? Thanks RE: MED17.5.5 iimmo transfered coding problem - sixcode - 30-06-2023 no do bdm programming, so your apdated eeprom and "ori" flash goes in to the donor ecu this is the correct way RE: MED17.5.5 iimmo transfered coding problem - immokill - 30-06-2023 And then I will be able to change ecu coding to manual gearbox? Ok I writed original flash to donor ecu, where immo data cloned , and now wont start IMMOBILISER ACTIVE with only immo data ytransfered it starts but esp light is ON any other sugestion how to make this work? Thanks RE: MED17.5.5 iimmo transfered coding problem - immokill - 30-06-2023 This is reading when put ORIG flash and no start with orig flash I start car but no throttle response if coding is 72, only if coding is 77 in ecu car runs normall. Must find ecu with manual gearbox????? Thanks alll I think that no one can solve this problem????? RE: MED17.5.5 iimmo transfered coding problem - sixcode - 30-06-2023 yes of course you need flash file with manual gearbox if you go from dsg to manual next time tell the whole story in first post also with what did you clone immo data because the file i did make is nothing like your and my works for sure? RE: MED17.5.5 iimmo transfered coding problem - ROD-BENDERS - 30-06-2023 (30-06-2023, 09:46 AM)immokill Wrote: Hello These files have been very messed with.... not ori amongst other things..... power class is missing in both eproms and no tools I have can correct this.... PC 42 VW is present in both donor and ori flash files DTC P1570 has been removed from both ori and donor files. here for what its worth write eep and flash no pass RE: MED17.5.5 iimmo transfered coding problem - immokill - 01-07-2023 SIXCODE I wroted in first post that car has manual gearbox and that ecu is from DSG gearboc car. I transfered immo data with vvdi2 directly on car from DASH to donor ecu and car is starting but can not change coding and ESP is light up. Car comes to me I did not mess up anything in original and donor flash only eeprom. I will try Rod files now. Thanks RE: MED17.5.5 iimmo transfered coding problem - immokill - 01-07-2023 Thnaks all . I will get same ECU , from manual gearbox , and then post here to adapt immo if I can not do it . Threat closed I did not know that ecu was messed up in flash . Not my fault . Thanks SIXCODE . ROD RENDERS thank you PLEASE CLOSE THREAT Must find good ecu from manual gearbix car. Regards |