[immokill]

Hello

I have problem with GOLF 6  1.4  TSI  
Changed ecu and changed immo data in eeprom car starts but I can not change coding  . Donor ecu is DSG  (coding 77) original ecu is coding 72 , I cant change it and ESP lisgh is ON
Ecu are same numbers indentical but did not know that it is from dsg car.

Here are  original,  donor  and immo data transfered files
int eep and int flash

Please help me , What is solution ? 
Thanks 

Regards

[sixcode]

you need to flash donor with ori flash file.....

[immokill]

Now my original ecu wontt start .error : Ecu not authirised!


do you mean flash by obd?

thanks

---

I started original ecu must put all with vvdi2 and car starts

No will clone eeprom write and oriinal flash

do I need to write original flash via OBD ?
Thanks

[sixcode]

no do bdm programming, so your apdated eeprom and "ori" flash goes in to the donor ecu
this is the correct way

[immokill]

And then I will be able to change ecu coding to manual gearbox?

---

Ok  I writed  original flash to donor  ecu, where immo data cloned , and now wont start IMMOBILISER ACTIVE 

with only  immo data ytransfered it starts but  esp light is ON

any other sugestion how to make this work?

Thanks

[immokill]

This is reading when put ORIG flash   and no start

---

with orig flash I start car but no throttle response if coding is 72,
only if coding is 77 in ecu car runs normall.

Must find ecu with manual gearbox?????

Thanks alll I think that no one can solve this problem?????

[sixcode]

yes of course you need flash file with manual gearbox if you go from dsg to manual
next time tell the whole story in first post

also with what did you clone immo data because the file i did make is nothing like your and my works for sure?

[ROD-BENDERS]

Hello

I have problem with GOLF 6  1.4  TSI  
Changed ecu and changed immo data in eeprom car starts but I can not change coding  . Donor ecu is DSG  (coding 77) original ecu is coding 72 , I cant change it and ESP lisgh is ON
Ecu are same numbers indentical but did not know that it is from dsg car.

Here are  original,  donor  and immo data transfered files
int eep and int flash

Please help me , What is solution ? 
Thanks 

Regards

These files have been very messed with.... not ori

amongst other things..... power class is missing in both eproms and no tools I have can correct this.... PC 42 VW is present in both donor and ori flash files
DTC P1570 has been removed from both ori and donor files.

here for what its worth write eep and flash

no pass

[immokill]

SIXCODE I wroted in first post that car has manual gearbox and that ecu is from DSG gearboc car.
I transfered immo data with vvdi2 directly on car from DASH to donor ecu and car is starting but can not change coding and ESP is light up.

Car comes to me I did not mess up anything in original and donor flash only eeprom.
I will try Rod files now.

Thanks

[immokill]

Thnaks all .

I will  get same ECU  , from manual gearbox , and then post here to adapt immo if I can not do it .

Threat closed  I did not know that ecu was messed up in flash .
Not my fault . 
Thanks SIXCODE  .

ROD RENDERS   thank you 


PLEASE CLOSE THREAT   Must find good ecu from manual gearbix car.



Regards