+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: 520D G30 - Remove SCR from ISTA (/showthread.php?tid=81939)
Pages:
1
2
520D G30 - Remove SCR from ISTA - AlpinWeiss2k18 - 06-08-2023
Hello!
How i can remove SCR control unit from control units tree after AdBlue off?
Thank you!
RE: 520D G30 - Remove SCR from ISTA - mr_nitroz - 06-08-2023
In esys save SVT and in SVT editor delete from it SCR unit and save.
Then upload new SVT in VCM as SVT target (expert mode - VCM - SVT Target then master - write SVT target).
In options-settings-options check update VCM after TAL execution and code any unit.
RE: 520D G30 - Remove SCR from ISTA - SkeYT - 06-08-2023
Just add $161 to FA and unplug SCR ECU or fuses. In some cars when you add 161 you can flash DDE with EU5 specific firmware and SCR will be deleted by original firmware. Just look what ESYS calculate after change FA to EU5.
RE: 520D G30 - Remove SCR from ISTA - VroomVroom - 06-08-2023
(06-08-2023, 17:40 PM)SkeYT Wrote: Just add $161 to FA and unplug SCR ECU or fuses. In some cars when you add 161 you can flash DDE with EU5 specific firmware and SCR will be deleted by original firmware. Just look what ESYS calculate after change FA to EU5.using this method you can remove adblue on f series without chip tuning
RE: 520D G30 - Remove SCR from ISTA - lagunasec - 07-08-2023
Does this method work in G series?
RE: 520D G30 - Remove SCR from ISTA - Fatalix - 07-08-2023
(07-08-2023, 12:02 PM)lagunasec Wrote: Does this method work in G series?
Would this also have effect for example for defective NOx sensors? Would it make errorcodes for those dissapear also if flashed with 161 sw?
RE: 520D G30 - Remove SCR from ISTA - marcdts - 07-08-2023
(07-08-2023, 16:21 PM)Fatalix Wrote:(07-08-2023, 12:02 PM)lagunasec Wrote: Does this method work in G series?
Would this also have effect for example for defective NOx sensors? Would it make errorcodes for those dissapear also if flashed with 161 sw?
This doesnt work on G serries
for SCR delete (flash to EU5)
RE: 520D G30 - Remove SCR from ISTA - OBDSolutions - 08-08-2023
(07-08-2023, 17:39 PM)marcdts Wrote:(07-08-2023, 16:21 PM)Fatalix Wrote:(07-08-2023, 12:02 PM)lagunasec Wrote: Does this method work in G series?
Would this also have effect for example for defective NOx sensors? Would it make errorcodes for those dissapear also if flashed with 161 sw?
This doesnt work on G serries
it's possible to deactivate SCR by flashing G series to EU5 but firstly you need to reset mth
RE: 520D G30 - Remove SCR from ISTA - jb2005 - 09-08-2023
(08-08-2023, 11:33 AM)OBDSolutions Wrote: it's possible to deactivate SCR by flashing G series to EU5 but firstly you need to reset mth
That's interesting. What are you referring to by "mth"?
RE: 520D G30 - Remove SCR from ISTA - petkowo - 09-08-2023
(09-08-2023, 06:38 AM)jb2005 Wrote:(08-08-2023, 11:33 AM)OBDSolutions Wrote: it's possible to deactivate SCR by flashing G series to EU5 but firstly you need to reset mth
That's interesting. What are you referring to by "mth"?
motor hours?