ISPI NEXT TOOL - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: ISPI NEXT TOOL (/showthread.php?tid=8383) |
RE: ISPI NEXT TOOL - rafi-88 - 03-07-2015 Sangandi - great work! Can You make a licence for Rolls Royce cars ? RE: ISPI NEXT TOOL - Ruce - 03-07-2015 I install ISTA/P, but it says "ISTA/P nicht Installiert". Which folder i should put this file "BMW_ISPI_ISTA-P_DAT_3.56.0.500.istap" ? ISPI NEXT TOOL - sangandi - 03-07-2015 In the same folder as the tool Gesendet von iPhone mit Tapatalk RE: ISPI NEXT TOOL - jal1234 - 03-07-2015 I finally got this all installed. Had the SQLite database issue, so I installed those files manually. I'm using the BETA 2 version of the Tool. Problem: If I start ISTA/D in German, it loads in about 2-3 minutes. If I change language to English and start it, it takes at least 5-10 minutes to load. I can switch languages after it starts from German to English, and it works fine. This is rather inconvinient, especially if I forget to set ISTA/D back to German before I shut it down. I've seen a few other posts on this on Google, but no real fix. Anyone have an idea how to fix this? RE: ISPI NEXT TOOL - Robocop25 - 03-07-2015 Hi, i got following error with ISTA/P. May you have an clue, why ? ISTA/D works fine. RE: ISPI NEXT TOOL - KaiO - 03-07-2015 (03-07-2015, 16:44 PM)jal1234 Wrote: I finally got this all installed. Had the SQLite database issue, so I installed those files manually. I'm using the BETA 2 version of the Tool.there's no fix for this. Maybe next version will be debugged RE: ISPI NEXT TOOL - jal1234 - 03-07-2015 (03-07-2015, 16:56 PM)Robocop25 Wrote: Hi, I got the English version of that screen until I used ISTA/P Loader v3.2 so I could use my OBD interface with ISTA/P. Once I did that, ISTA/P works fine, and finds a psuedo ICOM that is actually my OBD cable. If you have an ICOM, you probably need to set it up first, so that ISTA/P sees it on the network. RE: ISPI NEXT TOOL - Robocop25 - 03-07-2015 (03-07-2015, 17:21 PM)jal1234 Wrote:(03-07-2015, 16:56 PM)Robocop25 Wrote: Hi, Ok, that means i need ICOM Interface to avoid this message. Other solution is to search for ISTA/P Loader to use it with USB OBD Cable RE: ISPI NEXT TOOL - nino17 - 03-07-2015 (03-07-2015, 16:56 PM)Robocop25 Wrote: Hi, restart of the comp . then shut down its WIFI RE: ISPI NEXT TOOL - LinkX - 04-07-2015 Hello, I install this tool, only ISTA D, ISPI Admin Client and HDD update. But I was disappointed because cannot work with k+dcan Sangandi, you do not have a patch to work with k+dcan ? Another problem, If I go by ISPI NEXT TOOL gives me error, in hdd uptade and ISTA too. If click in shortcut icon open normaly Thanks |