[rafi-88]

Sangandi - great work!
Can You make a licence for Rolls Royce cars ?

[Ruce]

I install ISTA/P, but it says "ISTA/P nicht Installiert". Which folder i should put this file "BMW_ISPI_ISTA-P_DAT_3.56.0.500.istap" ?

[sangandi]

In the same folder as the tool


Gesendet von iPhone mit Tapatalk

[jal1234]

I finally got this all installed. Had the SQLite database issue, so I installed those files manually. I'm using the BETA 2 version of the Tool.

Problem: If I start ISTA/D in German, it loads in about 2-3 minutes. If I change language to English and start it, it takes at least 5-10 minutes to load. I can switch languages after it starts from German to English, and it works fine. This is rather inconvinient, especially if I forget to set ISTA/D back to German before I shut it down. I've seen a few other posts on this on Google, but no real fix. Anyone have an idea how to fix this?

[Robocop25]

Hi,

i got following error with ISTA/P.

May you have an clue, why ?

ISTA/D works fine.

[KaiO]

I finally got this all installed. Had the SQLite database issue, so I installed those files manually. I'm using the BETA 2 version of the Tool.

Problem: If I start ISTA/D in German, it loads in about 2-3 minutes. If I change language to English and start it, it takes at least 5-10 minutes to load. I can switch languages after it starts from German to English, and it works fine. This is rather inconvinient, especially if I forget to set ISTA/D back to German before I shut it down. I've seen a few other posts on this on Google, but no real fix. Anyone have an idea how to fix this?

there's no fix for this. Maybe next version will be debugged

[jal1234]

Hi,

i got following error with ISTA/P.

May you have an clue, why ?

ISTA D works fine.

I got the English version of that screen until I used ISTA/P Loader v3.2 so I could use my OBD interface with ISTA/P. Once I did that, ISTA/P works fine, and finds a psuedo ICOM that is actually my OBD cable. If you have an ICOM, you probably need to set it up first, so that ISTA/P sees it on the network.

[Robocop25]

Hi,

i got following error with ISTA/P.

May you have an clue, why ?

ISTA D works fine.

I got the English version of that screen until I used ISTA/P Loader v3.2 so I could use my OBD interface with ISTA/P. Once I did that, ISTA/P works fine, and finds a psuedo ICOM that is actually my OBD cable. If you have an ICOM, you probably need to set it up first, so that ISTA/P sees it on the network.

Ok, that means i need ICOM Interface to avoid this message.
Other solution is to search for ISTA/P Loader to use it with USB OBD Cable

[nino17]

Hi,

i got following error with ISTA/P.

May you have an clue, why ?

ISTA/D works fine.

restart of the comp . then shut down its WIFI

[LinkX]

Hello,

I install this tool, only ISTA D, ISPI Admin Client and HDD update. But I was disappointed because cannot work with k+dcan

Sangandi, you do not have a patch to work with k+dcan ?


Another problem,
If I go by ISPI NEXT TOOL gives me error, in hdd uptade and ISTA too.

If click in shortcut icon open normaly

Thanks