ISPI NEXT TOOL - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: ISPI NEXT TOOL (/showthread.php?tid=8383) |
RE: ISPI NEXT TOOL - TibeRiuSca - 21-07-2015 (19-07-2015, 21:42 PM)OnkelTom Wrote:(19-07-2015, 18:23 PM)B1257 Wrote: Try the following, open regedit and take a look atWow, thank you B1257!!!! It work for me too!! Thank you!!! RE: ISPI NEXT TOOL - chuck norris - 22-07-2015 Just managed to install this. however in preferences i can´t choose ediabas like in my rheingold 3.46 only enet/ICOM. will it work and get a connection to the car? i can´t test it right now, so do others have the ediabas option and does it work with them? RE: ISPI NEXT TOOL - chuck norris - 22-07-2015 Ok, solution is so simple. you have to add _PLUS in the testergui.config RE: ISPI NEXT TOOL - BaggieMatt - 23-07-2015 Alternatively just click on the Ista_Plus button in the tool. Even simpler. RE: ISPI NEXT TOOL - jirkon - 27-07-2015 Hi to all,,, Much simpler solution,,, Follow instructions included. Chris RE: ISPI NEXT TOOL - DICKHILL - 27-07-2015 (20-07-2015, 04:41 AM)B1257 Wrote:(19-07-2015, 23:24 PM)OnkelTom Wrote: I tried to install the Update "BMW_ISPI_ISTA-P_SYS_3.56.1.002.msi" with "BMW_ISPI_ISTA-P_DAT_3.56.1.002.istap", but the same result as in my first post I have found the solution to this! I don't exactly know what causes the trouble, but I think it happens when you run ISTA/P the first time? All I know is that it worked on my laptops... Yes... It requires that you install ISTA/P again! (Maybe even an fresh install with the Admin client and ISTA/D?) But it don't have to be on the same computer, you want to use it on.. So leave that and either create a VM or just use another physical machine. After installing ISTA/P (v. 3.56.0.500), DON'T run it! Just copy these two files to your desktop or somewhere else: "TaurusClientConfig.xml" in "C:\ProgramData\BMW\ISPI\data\TRIC\ISTA-P\BMW\Client\layout\" and "popupAdministration.xml" in "C:\ProgramData\BMW\ISPI\data\TRIC\ISTA-P\BMW\Client\layout\maskcontent\" After copying the files, run ISTA/P and check that it works. Close ISTA/P entirely and then copy back the two files and overwrite them! Then you can start updating to v. 3.56.1.002 without (hopefully) any problems. (: (I did a fresh install with the Admin client and ISTA/D on another laptop, but I don't know if that is necessary?) UPDATE: I thought that if I can use the files between two laptops, others can use them too... So I have uploaded them to a temporary location: http://dickhill.dk/share/BMW/ (They will be moved to a new location, when I get my new server up and running!!) RE: ISPI NEXT TOOL - DICKHILL - 28-07-2015 Hmm...... After updating to 3.56.1.002, i noticed that ISTA/P isn't showing in Admin Client? (To be honest, I don't remember if it was before updating) I don't think it even matter, but is there a way to fix it? Isn't it just the regedit who is missing some info somewhere? Or could it maybe be because we are cheating and changing the Productversion to be 3.54 2.002? RE: ISPI NEXT TOOL - KEEEN - 28-07-2015 Hi guys, can you confirm if the download via Ispi next tool still working? After few interruptions yesterday not even start today at all. Thanks RE: ISPI NEXT TOOL - DICKHILL - 28-07-2015 (28-07-2015, 08:51 AM)KEEEN Wrote: Hi guys, can you confirm if the download via Ispi next tool still working? After few interruptions yesterday not even start today at all. I'll guess that it still works? To start and use the tool, you have to login, and since that is still possible, I think it works just fine? You could also just connect to sangandi's FTP server manually and download the needed files. (The tool is downloading from same place and info can be found in an earlier post) UPDATE: I'm writing from my phone, so didn't had the link... But I managed to find it quickly: http://cartechnology.co.uk/showthread.php?tid=7210 RE: ISPI NEXT TOOL - tigre - 29-07-2015 Hi, i have install ista/D an ista/P with this tool, all is ok, but when i try ISTA/D in F series i cant make diag, im using a icom. anyone know what i did wrong? in E series i can make diag and program. regards |