BMW F11 520D used units - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: BMW F11 520D used units (/showthread.php?tid=8678) Pages:
1
2
|
BMW F11 520D used units - _estima_ - 07-07-2015 Good afternoon friends I have a BMW F11 520D in my workshop to repair . Had a eletrical problem, then I changed the DDE , DASH , FRM , CAS , ZGW , and other modules . I bought another F11 modules used . I have ICOM A2 and ISTA / D and ISTA / P . When I try to encode or program , tells me that I have to dismantle and replace the units . Someone with experience who can help me ? excuse my English. RE: BMW F11 520D used units - _estima_ - 07-07-2015 I need to change VIN in units? How can i programe the used modules ? help me . thanks for all _estima_ RE: BMW F11 520D used units - SweetBMW - 07-07-2015 Program vin in the used units with esys. then program + code with ista p RE: BMW F11 520D used units - _estima_ - 07-07-2015 I will try and send feedback RE: BMW F11 520D used units - 9a10qr - 12-07-2015 (07-07-2015, 18:51 PM)SweetBMW Wrote: Program vin in the used units with esys. then program + code with ista pthis way impossible mate, not enough only change vin number on dme, cas and egs. should change dme and cas vin first on desk with programmer, then you should extract isn from old modules and write on cas dme and egs then you can program with e-sys. RE: BMW F11 520D used units - _estima_ - 14-07-2015 Hello 9a10qr if i read DME with new trasdata , i can change the VIN in unit? My CAS is NEW and the VIN is right now , and i change the VIN in KOMBI also. I have newbie in the e-sys software, i need help to extract isn from old modules . thanks for your help RE: BMW F11 520D used units - SweetBMW - 14-07-2015 Ah sorry, i read too quickly, didnt see it was the DDE and related units... sorry. RE: BMW F11 520D used units - _estima_ - 14-07-2015 Ok , no problem ... RE: BMW F11 520D used units - _estima_ - 16-07-2015 Hello hi try to code FRM , but when hi read SWE , appear a lot of CAFD files . What file hi choose to program? im newbie in this software. sorry for my ignorance. RE: BMW F11 520D used units - _estima_ - 16-07-2015 Its possible to read CAFD files to original modules and write in used modules ? sorry if my question dont make any sence. |