+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: BMW F11 520D used units (/showthread.php?tid=8678)
Pages:
1
2
RE: BMW F11 520D used units - 9a10qr - 20-07-2015
(14-07-2015, 08:05 AM)_estima_ Wrote: Hello 9a10qrHello _estima_,
if i read DME with new trasdata , i can change the VIN in unit?
My CAS is NEW and the VIN is right now , and i change the VIN in KOMBI also. I have newbie in the e-sys software, i need help to extract
isn from old modules .
thanks for your help
sorry for delay last week didn't visit the forum but hope not so late and maybe someone need this info later.
I dont know about trasdata but if you read it eeprom 32kb. you can extract isn,vin and also can edit. Vin number is not so important as ISN, most important thing ISN number in this scenario. If read eeprom size 8kb. not luck at all about DME.
If your CAS new and EGS regular CAS/EGS your car, you can extract isn from CAS with safe programmer and write it DME, ISN and VIN you can make work your car completelly.
After these steps you can think about E-Sys to program car, not before...
Regards,
RE: BMW F11 520D used units - _estima_ - 21-07-2015
Hello mate.
what the safe programmer hi need to read CAS ?
" If your CAS new and EGS regular CAS/EGS your car, you can extract isn from CAS with safe programmer and write it DME, ISN and VIN you can make work your car completelly. "
thanks for your help
RE: BMW F11 520D used units - _estima_ - 15-08-2015
Hello friends
I recover the original CAS of my BMW f11, i buy used GWS and used DME , i change VIN With e-sys.
Its possible to sync the DME-CAS-EGS? And starts the Car ?
I pay if its necessary to help me .
Thanks for all
RE: BMW F11 520D used units - Fx82 - 16-08-2015
There is an option in Rheingold to sync cas with dme and also the immobiliser.
RE: BMW F11 520D used units - _estima_ - 16-08-2015
Are you sure to do the timing in the series F ? " i found this option in special functions "
thanks
BMW F11 520D used units - _estima_ - 28-09-2015
(16-08-2015, 13:50 PM)Fx82 Wrote: There is an option in Rheingold to sync cas with dme and also the immobiliser.
Dont work with used units in F SERIES
Only new, becuase use ISN from other veicule. I need to erase this ISN , but not a easy thing.
Sent from my iPhone using Tapatalk
I buy a new one
Sent from my iPhone using Tapatalk
RE: BMW F11 520D used units - Fx82 - 01-10-2015
OK thanks for reporting.