ISTA won’t set up connection - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: ISTA won’t set up connection (/showthread.php?tid=87274) Pages:
1
2
|
ISTA won’t set up connection - dentzikhd - 04-01-2024 Hi all , my laptop is gone i i decide to start a new set up for my works so i bought a panasonic fz-g1 because is more handy and i installed all bmw tools along with ISTA the problem now is ISTA won’t scan the car basicslly when i select complete identification and scan it shows the conectiom manager when i can see ISTA recognised the car showing the VIN and the IP but once i select set up conection nothing happen ! I get a bit stuck because that never happen to me before any advice is welcome UPDATE: Problem SOLVED , everything sort it now after reinstall vcredist apparently that was the problem RE: ISTA won’t set up connection - energjia - 04-01-2024 what are you using ENET or ICOM? RE: ISTA won’t set up connection - Node - 04-01-2024 (04-01-2024, 12:38 PM)energjia Wrote: what are you using ENET or ICOM? Anyone who would BOTHER to spend 5s to look at the linked picture would see that it's ENET! RE: ISTA won’t set up connection - dentzikhd - 04-01-2024 just a simple ENET cable i don't have a ICOM yet literally the same cable and the same software which i used on the previous laptop with a single exception on the tablet i don't have lan port so i run an usb to rj45 adaptor in order to connect the enet cable RE: ISTA won’t set up connection - energjia - 04-01-2024 (04-01-2024, 12:43 PM)dentzikhd Wrote: just a simple ENET cable i don't have a ICOM yet literally the same cable and the same software which i used on the previous laptop with a single exception on the tablet i don't have lan port so i run an usb to rj45 adaptor in order to connect the enet cable did you run as admin the ISTA_firewall_rules.bat? RE: ISTA won’t set up connection - dentzikhd - 04-01-2024 Unfortunately i don’t have this file RE: ISTA won’t set up connection - energjia - 04-01-2024 (04-01-2024, 13:17 PM)dentzikhd Wrote: Unfortunately i don’t have this file here you have, rename from .txt to .bat RE: ISTA won’t set up connection - dentzikhd - 04-01-2024 run'it nothing change ... i will try to remove everything and fresh install again maybe works RE: ISTA won’t set up connection - rocdeng - 04-01-2024 If you installed BWM Tools package, Maybe you should check ediabas settings using EDIABAS Konfigurator2.0. Make sure you select the fourth option 'ENET'. It will display 'Ethernet Cable' above. RE: ISTA won’t set up connection - dentzikhd - 04-01-2024 (04-01-2024, 14:11 PM)rocdeng Wrote: If you installed BWM Tools package, Maybe you should check ediabas settings using EDIABAS Konfigurator2.0. Make sure you select the fourth option 'ENET'. It will display 'Ethernet Cable' above. i was runing outdated version of Mike's Easy BMW so now like i said i just clean up everything including ISTA and install BMW tools package from Sedoy now all i have to do is just reinstall a fresh ISTA and give it a try and i keep you guys posted also meanwhile if you can reckon a specific version of ISTA via torrent will be much appreciated |