Ista error after camera retrofit - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Ista error after camera retrofit (/showthread.php?tid=87627) Pages:
1
2
|
Ista error after camera retrofit - giando11 - 14-01-2024 Hi at all i ve retrofitted rear view camera On my f44...coding vo to all ecu except dme. What error are this? RE: Ista error after camera retrofit - krug - 14-01-2024 calculate test plan RE: Ista error after camera retrofit - Node - 14-01-2024 It sounds like you have not updated VCM, connected cam to wrong pins or something similar... RE: Ista error after camera retrofit - giando11 - 15-01-2024 (14-01-2024, 21:30 PM)Node Wrote: It sounds like you have not updated VCM, connected cam to wrong pins or something similar... Vcm are updated. If i read vo in salapa element i see 3ag. Camera works well without error. The only difference from the istruction that I connect power supply wire on pin 10 of pdc port instead of pin 9 of terminal 30. But i thing that power supply wire can t generate ehternet error RE: Ista error after camera retrofit - Node - 15-01-2024 VCM is NOT FA!!! RE: Ista error after camera retrofit - giando11 - 15-01-2024 (15-01-2024, 08:10 AM)Node Wrote: VCM is NOT FA!!! Oh yes...i thought the vcm are automatically update with optinon checked in esys menĂ¹. Do you have a link to procedure for update correctly vcm after fa change? Tnx RE: Ista error after camera retrofit - Node - 15-01-2024 If it's checked and you did any flashing/coding while it was checked it should be updated. You should see lines in the log that VCM was updated! RE: Ista error after camera retrofit - giando11 - 15-01-2024 (15-01-2024, 09:26 AM)Node Wrote: If it's checked and you did any flashing/coding while it was checked it should be updated. You should see lines in the log that VCM was updated! i've not code anithing, i only change VO with 3AG and simply code it in all almost ecus RE: Ista error after camera retrofit - inspi1981 - 15-01-2024 So You code it or not? RE: Ista error after camera retrofit - giando11 - 15-01-2024 (15-01-2024, 11:01 AM)inspi1981 Wrote: So You code it or not? yes code only vo in ecu |